ZEXHOM Professional Laminate Wood Flooring Installation Kit with 40 Spacers, Upgraded Tapping Block, Widen Pull Bar and Heavy Duty Mallet

#ad
ZEXHOM #ad - ZEXHOM Professional Laminate Wood Flooring Installation Kit with 40 Spacers, Upgraded Tapping Block, Widen Pull Bar and Heavy Duty Mallet #ad - Upgraded pull bar is 4mm thick, 12 inch long. The end of pull bar where connected to the wooden floor is widened, will not damage the floor. 1 x durable upgraded tapping block; 1 x heavy duty mallet; 1 x widen pull bar; 40 spacers. Suitable for 027in 7mm - 06in 15mm laminate or hardwood flooring. 40 spacers let you install your laminate wood flooring more convenient and easier.

1 x durable upgraded tapping block 1 x heavy duty mallet1 x widen pull bar40 spacersPerfect for your flooring installation project 40 mm 20oz double-headed rubber mallet is more heavy duty for your flooring installation.

More information about ZEXHOM #ad

TFloor Spacers | for Laminate Wood Flooring, Vinyl Plank, Hardwood & Floating Floor Installation

#ad
FloorTools FTS02 #ad - Laminate. Each case of 12 spacers is sufficient for areas of approximately 500 ft2, while 2-3 packs are recommended for larger installations. With these spacers your installation will retain a consistent gap for expansion between the flooring and your walls. Bamboo. The tfloor spacers can be used for any floating flooring material which requires an expansion gap range of 1/4"- 3/8".

With their unique t-shape design, the Tfloor spacers hold everything in place while laying your floor. You can also combine two spacers back to back, turned on their side for an 1/2" expansion gap. Vinyl Plank. Engineered Hardwood. Unlike other wedge spacers which move, the TFloor spacers lock your flooring in place, slip, tip over and get stuck, even when the wall is high.

TFloor Spacers | for Laminate Wood Flooring, Vinyl Plank, Hardwood & Floating Floor Installation #ad - Made of high-quality material. Cork flooring, or Any Floating Floor Material. Use tfloor spacers to install laminate wood flooring, engineered hardwood, vinyl plank, bamboo, cork flooring or any other floating floor material. When you are finished they are easy to remove.

More information about FloorTools FTS02 #ad


Similar products



ROBERTS 50-040 Underlayment Tape, Red

#ad
ROBERTS 50-040 #ad - Moisture resistant to better protect flooring from moisture damage. Moisture resistant. Bamboo. 48 mm x 305 m. Engineered Hardwood. The roberts underlayment seam tape is used for joining underlayment seams under floating floors and for repairing rips during underlayment installation. This versatile tape can also be used for carpet padding seams, general repairs, sealing boxes and much more.

X 100 ft. Laminate. Cork flooring, or Any Floating Floor Material. 1-7/8 in. For use on floating floors, repairing rips during underlayment installation, general repairs, carpet padding seams, sealing boxes and much more. Great for general multipurpose use. Used to join underlayment seams, use with any brand of underlayment.

ROBERTS 50-040 Underlayment Tape, Red #ad - Vinyl Plank.

More information about ROBERTS 50-040 #ad


Similar products



SKIL 3601-02 Flooring Saw with 36T Contractor Blade

#ad
Chervon- SKIL 3601-02 #ad - Laminate. For use on floating floors, repairing rips during underlayment installation, general repairs, carpet padding seams, sealing boxes and much more. Cuts solid, engineered and laminate flooring with ease. Bamboo. Lightweight design for transport and use at any project location. Vinyl Plank. Used to join underlayment seams, use with any brand of underlayment.

1-7/8 in. Makes cross, miter and rip cuts. 48 mm x 30 With the capabilities of a standard miter and table saws, the compact SKIL flooring saw model 3601 allows you to cut flooring right where you're installing. Die-cast aluminum miter and rip fence. Miter detents at 0, 22. 5 and 45 degrees. Great for general multipurpose use.

SKIL 3601-02 Flooring Saw with 36T Contractor Blade #ad - Durable, lightweight and portable, DIYers and flooring specialists agree it makes wood floor installation easier and faster. X 100 ft. 5 m. Engineered Hardwood.

More information about Chervon- SKIL 3601-02 #ad


Similar products



Bullet Tools Ergonomic Professional Grade Plank Flooring Tapping Block

#ad
Bullet Tools 711 #ad - Vinyl Plank. Close gaps during flooring installation with the Ergonomic Flooring Tapping Block. Great for general multipurpose use. Made in the USA. 5 m. Great for closing gaps between standard flooring planks. Bamboo. Die-cast aluminum miter and rip fence. Made from high quality durable plastic, to last many installations of laminate flooring planks.

Made of high density polyethylene for long-lasting durability. 48 mm x 30 Miter detents at 0, 22. 5 and 45 degrees. Lightweight design for transport and use at any project location. Lightweight, must-have tool for easier flooring installations. X 100 ft. Moisture resistant. Used to join underlayment seams, use with any brand of underlayment.

Bullet Tools Ergonomic Professional Grade Plank Flooring Tapping Block #ad - Engineered Hardwood. Makes cross, miter and rip cuts. For use on floating floors, carpet padding seams, repairing rips during underlayment installation, general repairs, sealing boxes and much more. Cuts solid, engineered and laminate flooring with ease.

More information about Bullet Tools 711 #ad


Similar products



IRWIN Tools ProTouch Dovetail / Jamb Saw, 10-inch 2014450

#ad
IRWIN 2014450 #ad - This dovetail saw uses a spring-loaded, reversible blade that can be used for left- or right-cutting. A wide-body flush-cut blade on this dovetail saw measures 50 mm. 1-7/8 in. Great for general multipurpose use. Cork flooring, or Any Floating Floor Material. Lightweight design for transport and use at any project location.

14-pt. Moisture resistant. Used to join underlayment seams, use with any brand of underlayment. 48 mm x 3010" blade length and 2" blade thickness. This irwin protouch dovetail saw / jamb Saw features a spring-loaded design that enables you to reverse the blade for left- or right-cutting. Miter detents at 0, 22.

IRWIN Tools ProTouch Dovetail / Jamb Saw, 10-inch 2014450 #ad - 5 and 45 degrees. Tooth count. Lightweight, must-have tool for easier flooring installations. Ergonomic design features ball handle for excellent grip. Made of high density polyethylene for long-lasting durability. Die-cast aluminum miter and rip fence.

More information about IRWIN 2014450 #ad


Similar products



MantisTol 13'' Pro Flooring Cutter MC-330 with Installation Kit Gifts! For Laminate Floor, Siding, Rigid Core Vinyl Plank. Best Buying !

#ad
CutTool Ltd. MC-330 #ad - Die-cast aluminum miter and rip fence. Makes cross, miter and rip cuts. Straight cut and 45 degree angle cut. X 100 ft. Cuts up to 13"330mm wide and 5/8″ 16mm thick. If you use it for business purposes, make sure you have a spare new blade. Lightweight design for transport and use at any project location. 48 mm x 30

Lightweight, must-have tool for easier flooring installations. Cutting length: 330 mm 13 ", and max. 5 m. The protouch handle on each jamb saw provides ergonomic comfort. For laminate, bamboo flooring, spc, solid wood, parquet, WPC, deck-floor-boards, LVT, Multi-Floor, fiber-cement siding, rubber cove base, lvp, vcT, Vinyl Flooring and more.

MantisTol 13'' Pro Flooring Cutter MC-330 with Installation Kit Gifts! For Laminate Floor, Siding, Rigid Core Vinyl Plank. Best Buying ! #ad - Sturdy high-quality steel and heavy duty aluminum construction. Replacement Blade; https://www. Amazon. Com/sharp-blade-flooring-cutter-mC-330/dp/B077ZW48MJ?ref_=ast_sto_dp. Made in the USA. Moisture resistant. Cork flooring, or Any Floating Floor Material. 10" blade length and 2" blade thickness.

More information about CutTool Ltd. MC-330 #ad


Similar products



Tavy 1/4" Orange Wedge Spacers 100/Bag

#ad
Tavy SPC14WED #ad - Vinyl Plank. Made of high density polyethylene for long-lasting durability. 100 per bag. 48 mm x 30 Replacement Blade; https://www. Amazon. Com/sharp-blade-flooring-cutter-mC-330/dp/B077ZW48MJ?ref_=ast_sto_dp. The grooved wedge design prevents slipping from between tiles on floors or walls and for easy removal. 14-pt.

X 100 ft. Makes tile spacing easy! For use on floating floors, carpet padding seams, repairing rips during underlayment installation, general repairs, sealing boxes and much more. Cuts solid, engineered and laminate flooring with ease. Laminate. Great for closing gaps between standard flooring planks. In addition to standard spacing between tiles, This dual design allows for easy installation of tiles in various applications such as between wall tiles starting from the floor, bathtubs or fireplace surrounds.

Tavy 1/4" Orange Wedge Spacers 100/Bag #ad - For laminate, wpc, lvt, multi-floor, spc, bamboo flooring, rubber cove base, deck-floor-boards, fiber-cement siding, lvp, solid wood, vcT, parquet, Vinyl Flooring and more. Sturdy high-quality steel and heavy duty aluminum construction. Cork flooring, or Any Floating Floor Material. Makes cross, miter and rip cuts.

Straight cut and 45 degree angle cut.

More information about Tavy SPC14WED #ad


Similar products



Kraft Tool FC518 Undercut Door Jamb Saw

#ad
Kraft Tool FC518 #ad - Laminate. 14-pt. Made of high density polyethylene for long-lasting durability. Clean and straight cutting edge as shown on the Left side. 36-1/2" handle for increased leverage with less effort. Straight cut and 45 degree angle cut. Made in the USA. 4 mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.

12-inch long replaceable blade. Great for closing gaps between standard flooring planks. Engineered Hardwood. Die-cast aluminum miter and rip fence. If you use it for business purposes, make sure you have a spare new blade. Tooth count. Kraft tool's product line is manufactured for the Professional Craftsman. 5 m. Used to join underlayment seams, use with any brand of underlayment.

Kraft Tool FC518 Undercut Door Jamb Saw #ad - Bamboo. Lightweight design for transport and use at any project location. Perfect tool for cutting door jambs and other hard-to-reach areas. 1/4" orange spacers. Ergonomic design features ball handle for excellent grip.

More information about Kraft Tool FC518 #ad


Similar products



TEKTON 3318 15-Inch Utility Pry Bar

#ad
TEKTON 3318 #ad - Three nail slots one at each end, one in the middle lets you get at nails from any angle. Durable and strong. 1/4" orange spacers. Nail slots at each end and in the middle let you get at nails from multiple positions or angles. 4 mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.

Makes tile spacing easy! Ergonomic design features ball handle for excellent grip. This dovetail saw uses a spring-loaded, reversible blade that can be used for left- or right-cutting. Moisture resistant. Made from high-strength forged and heat-treated steel, this tough guy will quickly become one of your most trusted tools in the box.

TEKTON 3318 15-Inch Utility Pry Bar #ad - Easy to place and remove. Made in the USA. Great for general multipurpose use. Miter detents at 0, 22. 5 and 45 degrees. Sharp, free worn shingles, loosen molding, thin chisel tips slip effortlessly into the tightest cracks and crevices to pry apart old wall studs, and lift damaged deck boards.1-7/8 in. Used to join underlayment seams, use with any brand of underlayment.

More information about TEKTON 3318 #ad


Similar products



QuietWalk Underlayment for Laminate Flooring with Attached Vapor Barrier Offering Superior Sound Reduction, Moisture Protection, and Compression Resistance, 100 sq. ft, Blue

#ad
MP Global Products QW100B1LT #ad - Built with sound reduction and moisture dissipation in mind. If your in a condo/multi-family, your neighbor above/below won't think you have an obsession for Rice Krispies. Great for closing gaps between standard flooring planks. No electricity, no dust, quick, quiet and Easy to use. Item weight 18. 7 lbs, diy for household and Business, Strong and Durable, Preferred for receiving business!.

QuietWalk Underlayment for Laminate Flooring with Attached Vapor Barrier Offering Superior Sound Reduction, Moisture Protection, and Compression Resistance, 100 sq. ft, Blue #ad - Engineered Hardwood. Lightweight design for transport and use at any project location. Miter detents at 0, 22. 5 and 45 degrees. High-strength forged and heat treated steel construction. Not too thin or thick - You won't have to worry about thinness. Tooth count. Thin, sharpened chisel tips slide easily into the tightest cracks and crevices.

No holes will be created by accidentally dropping your installation tools during installation. 48 mm x 3012-inch long replaceable blade. Lightweight, must-have tool for easier flooring installations. Replacement Blade; https://www.

More information about MP Global Products QW100B1LT #ad


Similar products