Top 9 Inner Tie Rod Removal Tool – Automotive

As an Amazon Associate I earn from qualifying purchases.

1. Powerbuilt


Powerbuilt 648607 Inner Tie Rod Remover Kit

Powerbuilt #ad - Made to be the most reliable tools in the market today. Built to exceed tool standards. Tool solutions for most all situations. Designed for removing the inner tie rod. Storage case includes laminated instruction sheets with photos. Includes 1-5/16 inches, 1-3/16 inches and 1-71/6 inches adapters.
BrandPowerbuilt #ad
ManufacturerAlltrade Tools #ad
Height9.88 Inches
Length3.5 Inches
Width19.25 Inches
Part Number648607

2. mainpoint


Mainpoint Universal Inner Tie Rod Hex Wrench Removal Tools 27-42mm

mainpoint #ad - Suitable for tie rods between 27mm and 42mm in diameter. Specially designed to be used with 1/2" square drive tools. Easily removes inner tie rod ends without disassembling rack and pinion. Designed for the removal of the direction of the steering rod. Universal fits for all vehicles including Mercedes, Ford, Benz, Toyota, Nissan, BMW, Honda, etc.
Brandmainpoint #ad
ManufacturerMainpoint Tools #ad
Height2.36 Inches
Length3.54 Inches
Weight0.85 Pounds
Width2 Inches
Part Number1680146

3. Jikkolumlukka


NEW Inner Tie Rod Removal Tool Set Car Auto Mechanics Inner Tie Rod Tool Kit

Jikkolumlukka #ad - Drive : Manual. Condition : new **Case may vary**. Type : inner tie Rod Removal Tool. 2. The inner tie rod can be easily removed and installed 3. By slipping the long socket over the tie rod end and connecting it to the open-jaw driver. Quantity : 1 x inner Tie Rod Removal Tool Set. Application: 1. Designed for the inner tie rods that are inaccessible to adjust.
BrandJikkolumlukka #ad
ManufacturerTool Company #ad
Part NumberB14

4. Performance Tool


Performance Tool W83025 Tie Rod Puller

Performance Tool #ad - Open throat capacity 1-5/8 in. Jaw opening 1 in. For use on imports and front wheel drive vehicles including SUV's with rack and pinion steering. Center tip on forcing screw swivels to help remove and prevent damage to the tie rod stud.
BrandPerformance Tool #ad
ManufacturerWilmar Corporation #ad
Height8 Inches
Length43 Inches
Weight1.15 Pounds
Width27 Inches
Part NumberW83025

5. DiER


Tie Rod End Wrench Removal With 1/2" Square Drive Tool 27-42mm

DiER #ad - Suitable for tie rods between 27mm and 42mm in diameter. Applicable to various vehicles benz, toyota, bmw, FORD, NISSAN, HONA, ETC. Tie rod end wrench removal tool x 1: Total length:80mm; Total width:35mm. Easily removes inner tie rod ends without disassembling rack and pinion. Specially designed to be used with 1/2" square drive tools. Designed specifically for the removal of the direction of the steering rod; Master tie rod tools easily replace inner tie rod Ends.
BrandDiER #ad
ManufacturerDiER #ad



OEMTOOLS 27185 Inner Tie Rod Tool Kit

OEM TOOLS #ad - Comes in sturdy Blow Mold Case. Includes: 1-3/16", 1-5/16" and 1-7/16". Reversible and Adjustable.
BrandOEM TOOLS #ad
ManufacturerGreat Neck Saw #ad
Height2.1 Inches
Length19 Inches
Weight5.85 Pounds
Width7.8 Inches
Part Number27185



OEMTOOLS 25296 Inner Tie Rod Tool

OEM TOOLS #ad - Used to easily Turn Tie Rods. Used to service inner Tie Rods on Rack and Pinion Steering Assemblies. Can also be used on all innter tie rods with 1-3/16 and 1-5/16 in Hex Sizes. Removes and installs inner Tie Rods on Many GM and Some Chrysler Products.
BrandOEM TOOLS #ad
ManufacturerGreat Neck Saw #ad
Height0.8 Inches
Length6.9 Inches
Weight0.75 Pounds
Width5 Inches
Part Number25296
WarrantyOEMTOOLS Limited Lifetime

8. GearWrench


GEARWRENCH 15 Pc. Ratcheting Serpentine Belt Tool Set, 3680D

GearWrench #ad - Combining the innovation of a gearWRENCH ratcheting wrench with the requirements of the serpentine belt removal tool to provide the best possible combination.

Includes 6 point sockets: 13 millimeter, 17 millimeter, 15 millimeter, 16 millimeter, 14 millimeter, 18 millimeter and 19 millimeter. Complete tool set for removing or installing the serpentine belt on vehicles with a spring loaded belt tensioner pulley. Includes crowsfoot: 13mm, 14mm and 15mm. Long bar can hold sockets directly or attach to the ratcheting wrench for maximum access. Includes drive tools: long bar, and 3/8", special gearWrench Ratcheting Wrench, 1/2" and 3/4" Adapters.
BrandGearWrench #ad
ManufacturerGearWrench #ad
Height2.5 Inches
Length15.55 Inches
Weight1.35 Pounds
Width5.05 Inches
Part Number3680D
WarrantyStandard Limited Lifetime

9. Neiko


Neiko 20642A Auto Inner Tie Rod Removal Set 4 Piece

Neiko #ad - Quality construction. 4 piece with case. Dual tie rod tool 1-3/16" & 1-5/16" hex. 3 adaptors: 1-3/16", 1-5/16" & 1-7/16" in 1-5/16" hex.
BrandNeiko #ad
ManufacturerRidgerock Tools Inc. #ad
Height19.21 Inches
Length86 Inches
Weight6.15 Pounds
Width2.17 Inches
Part Number20642A