Top 9 Individual Drill Bits – Jobber Drill Bits

As an Amazon Associate I earn from qualifying purchases.

1. DEWALT

#ad

DEWALT DW1308-1/8-Inch Titanium Split Point Twist Drill Bit,Gold

#ad
DEWALT #ad - The product is 1/8" Titanium Drill Bit. Titanium coating for maximum life. Easy to use. The product is manufactured in China.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height0.16 Inches
Length5.75 Inches
Weight0.03 Pounds
Width1.88 Inches
Part NumberDW1308
ModelDW1308
Warranty1 Year Full Warranty

2. BOSCH

#ad

Bosch TI2132 5/64 In. x 2 In. Titanium-Coated Drill Bit

#ad
BOSCH #ad - Self-starting point starts on contact. Super-hard titanium coating lasts up to six times longer than high-speed steel. Drills clean, plexiglass, copper, pvc, veneers, aluminum, wood, plastic, plasterboard, accurate holes in these thin materials up to 1/8 In. Sheet metal, steel, ducts, vinyl siding, brass, stainless steel and cast iron. Balanced double flute eliminates chatter and vibration. Titanium reduces heat for longer life.
BrandBOSCH #ad
ManufacturerBosch #ad
Height0.11 Inches
Length5.8 Inches
Weight0.01 Pounds
Width1.9 Inches
Part NumberTI2132
ModelTI2132

3. AUTOTOOLHOME

#ad

AUTOTOOLHOME Combination Drill and Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6

#ad
AUTOTOOLHOME #ad - Including 6 sae sizes: 6-32nc, 8-32nc, 10-32nc, 1/4inch hex quick change shank fit Electric hand drill, 10-24nc, 12-24nc, ¼-20NC, impact drill, bench drill, electric screwdriver and other tap machine. This is a sae drill tap set, so it has high versatility. The split point tip resists walking and penetrates faster into the material.

Along with fast penetration, the power drill makes your life easy by saving your time and energy. The wide range of drill tap bit set helps you with tasks like drilling, deburring and countersinking, tapping, all with this single kit. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick change ¼-inch 6. 35mm hex shank has a tapered end to prevent excessive knocks. Durable taps are made from hardened high-speed steel HSS 4341 vs carbon steel for longer life, deburr and counter holes on wood, copper, tap, aluminum, which can drill, brass, sheet metal and plastic.

Can be used to tap various threads. Easy to carry and use, as the drill tap bits set comes with a portable storage case you can carry it anywhere you go. Back taper exceeds the tap to prevent over-drilling and damage to the thread. If you encounter any problems or are not satisfied with the products while using our products, please feel free to contact us.
BrandAUTOTOOLHOME #ad
ManufacturerJYC International Trade Co., Ltd. #ad
Part Number00952

4. DEWALT

#ad

DEWALT DWA1207 7/64" Pilot Point Industrial Cobalt Drill Bit

#ad
DEWALT #ad - Pilot point and split tip design. Designed for maximum speed and life. No bit walking - more user control. Intended to be used on hard metals.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height5.75 Inches
Length1.87 Inches
Weight0.02 Pounds
Width0.12 Inches
Part NumberDWA1207
ModelDWA1207

5. BOSTAL

#ad

Metal and Cast Iron1/16", 1/4", Stainless Steel, BOSTAL Cobalt Drill Bit Set18Pcs M35 HSS Twist Drill Set for Steel

#ad
BOSTAL #ad - Within 60 days product quality is not completely satisfied, contact us 100% refund. Total 18PCS. Perfect suitable for drill holes in stainless steel, wood, alloy steel, nonferrous metal, cast iron and hard plastics.

Ansi 94. 11 standards, jobbers length, 1/16 5/64 3/32 7/64 1/8 x2pc/size 9/64 5/32 11/64 3/16 13/64 7/32 15/65 1/4 drill bits x1pc/size. 60days refund police. Super performance: bostal drill is one professional oEM Factory for famous brand; High quality drill bits is prime. M35 cobalt steel, for fast cutting and life, up to 10time than the normal HSS bits. Pvc bag packing for save cost for customer. No spin shanks and135-degree split-point reduces slip and walking, titanium Coating for greater wear protection and long life.
BrandBOSTAL #ad
Manufacturerbostal #ad

6. DEWALT

#ad

DEWALT DD5124 Impact Ready Titanium Drill Bit, 3/8"

#ad
DEWALT #ad - Patented pilot point tip allows users to drill holes faster and offers clean burr free holes. Common users include electricians, HVAC, mechanics, glaziers and GC's. Ground from solid 1-piece design is up to 5 times more durable than the current 2-piece conventional product. Patented web taper increases the rigidity of the bit to decrease the potential for bit breakage.
BrandDEWALT #ad
ManufacturerDEWD7 #ad
Height6.75 Inches
Length1.87 Inches
Weight0.1 Pounds
Width0.38 Inches
Part NumberDD5124
ModelDD5124

7. BOSCH

#ad

Bosch CO2136B 9/64 In. x 2-7/8 In. Cobalt M42 Drill Bit

#ad
BOSCH #ad - Standard bits. Cobalt m42 drill bit – provides upgraded m42 cobalt jobber-length bits designed for durability, titanium, high heat resistance and Hardened surface for stainless steel, cast iron, light-gauge metal and aluminum. Surface-hardened tip – penetrates tough abrasive materials. High-heat resistant bits – withstand high-temperature applications for extended periods of time. Enhanced m42 alloy material – contains 8% Cobalt alloy that delivers 10x life vs. Thick web-helix design – provides additional stability in tough applications.
BrandBOSCH #ad
ManufacturerBosch #ad
Part NumberCO2136B
ModelCO2136B
WarrantyProduct Defects Only

8. COMOWARE

#ad

1/16"-1/4", COMOWARE Titanium Twist Drill Bit Set, 13 Pcs Hex Shank High Speed Steel for Wood Plastic Aluminum Alloy, Quick Change

#ad
COMOWARE #ad - Meet your demands - great drill bits set for metal/wood/plastic countersink. Organized holder - a drill bits holder with size index is included in the set for easy storage and organizing.

Quick change - 1/4 inch hex shank fits into all power tools more easily and securely, specially for locking into quick change chuck. Flutes form - 2 flutes form helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process. The drill bits set fits the majority of brands currently on the market. Suitable for home DIY, and General Building/Engineering Use. Hss titanium coating - classic hss construction with titanium coating for capability and durability. The cutting edge is hardened and honed for sharpness, chatter-free design with staggered cutting teeth ensure the precise countersinking and hole smooth clean.
BrandCOMOWARE #ad
ManufacturerCOMOWARE #ad
Part Number43551-119049

9. STROTON

#ad

Metric M42 8% Cobalt Twist Drill Bits Set for Stainless Steel and Hard Metal 1mm-10mm/19pcs

#ad
STROTON #ad - 3 steps desigh for cutting through Stainless Steel, Hard Metals, Aluminum, Plastic. Premium m42 8% cobalt steel, 68-70 hrc rockwell hardness Scale, Usually Give the Best Heat, Wear and Chip Resistance and Long Tool Life.

19pcs 135 degree split point drill bits includes :1mmlength:3. 4cm\1. 5mm\2mm\2. 5mm\3mm\3. 5mm\4mm\4. 5mm\5mmlength:8. 5cm\5. 5mm\6mmlength:9cm\6. 5mm\7mm\7. 5mm\8mmlength:11. 5cm\8. 5mm\9mm\9. 5mm\10mmlength:13cm DIA 05mm Increments. This cobalt drill bit is typically capable of running three to five times Faster. Despite the higher price, the cost per hole when Using Cobalt Drill Bit Will be the Lowest, Since It Can Produce So Many More Holes. The sufficiently sharp bit edge can cut the metal Material into Long Strips of Iron Chips rather than Slowly Grinding Throng the Material with a Blunt Drill Bit.
BrandSTROTON #ad
ManufacturerSTROTON Ltd #ad
Part NumberM42 Cobalt-8(19pcs)
Model.