Top 9 Glider Bracket Hardware – Hardware

Uncategorized
As an Amazon Associate I earn from qualifying purchases.

1. L Continue

 #ad

L Continue 4 Pack Glider Bracket Hardware, Hardware Center Distance 7-1/2" and Bolt Hole Diameter 1/4".

#ad
L Continue #ad - Both ends 1-1/4" offset, Bolt Hole Diameter 1/4". Total length 9", The Overall Galvanizing Process. Hardware hole center Distance 7-1/2". Refund or replacement At Any Time Within 1 Year.
BrandL Continue #ad
ManufacturerL Continue #ad

2. Outdoor Play and Storage

 #ad

5/16" x 7-1/2", Glider Arms, Set of 4

#ad
Outdoor Play and Storage #ad - Set of 4; made of yellow zinc. Bearing: 5/16". Center hole to center hole: 7-1/2". Overall dimensions: 9-1/4" x 1-1/2"".
BrandOutdoor Play and Storage #ad
ManufacturerOutdoor Play and Storage #ad

3. Liberty Hardware

 #ad

Liberty Hardware D80622C-ZP-W 22-Inch Ball Bearing Drawer Slides

#ad
Liberty Hardware #ad - Full extension opening allows for the entire drawer to be accessed. Includes mounting hardware and installation instructions. Rated for heavy-duty use loads up to 100 pounds. Made from stamped steel with a zinc plated finish. Ball bearing functionality ensures smooth opening and closing action.
BrandLiberty Hardware #ad
ManufacturerLIBERTY #ad
Height1.8 Inches
Length0.5 Inches
Weight3.85 Pounds
Width21.8 Inches
Part NumberD80622C-ZP-W
ModelD80622C-ZP-W

4. PRIME-LINE

 #ad

White 1 Pair 2 LH, PRIME-LINE R 7210 Drawer Slide Kit – Replace Drawer Track Hardware – Self-Closing Design –Fits Most Bottom/ Side-Mounted Drawer Systems –15-3/4” Steel Tracks, Plastic Wheels, 2 RH

#ad
PRIME-LINE #ad - 75 lbs max load capacity – the maximum load capacity for the drawer slide kit is 75 lbs. The drawer slide kit is constructed of steel tracks with a white powder coated finish and self-lubricating plastic rollers. Installation instructions are included and also available on Prime-Line’s website.

Install or replace drawer track hardware – whether you are installing new drawers or repairing one that won’t open or close properly, Prime-Line Drawer Slide Kit fits most bottom/side-mounted drawer systems. Self-closing design – the smooth-gliding tracks in the prime-line r 7210 kit features a self-closing design that commences at the final 2-1/2” from the end of the 15-3/4” long tracks when closing. Easy to install – installation is quick and easy, and the kit contains all necessary fasteners.

And is for use in 16” deep drawer cabinets. Installation tip – the clearance required between the drawer and the drawer opening for these slides is: 1/2” on left and right sides, 1/4” at the bottom and 5/8” at the top. It features a positive stop in the closed position and a double stop in the extended position that locks your drawer open, so it cannot be pulled too far out and fall off the tracks.
BrandPRIME-LINE #ad
ManufacturerPrime-Line Products #ad
Height16 Inches
Length1 Inches
Weight0.74 Pounds
Width1.43 Inches
Part NumberR 7210
ModelR 7210
WarrantyGoods are warranted against manufacturing defects for 1 year. In no case is Prime-Line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.

5. PRIME-LINE

 #ad

White, 1 RH, PRIME-LINE R 7265 Drawer Track Back Plate, 1 Pair 1 LH, 3/8 in. x 1 in, Plastic

#ad
PRIME-LINE #ad - 3/8 in. Deep openings. Wide x 1 in. Tall x 3-9/16 in. White in color. Used to support side mounted drawer glides. Constructed of plastic.
BrandPRIME-LINE #ad
ManufacturerPrime-Line Products #ad
Height3.68 inches
Length1.25 Inches
Weight0.15 Pounds
Width2.25 Inches
Part NumberR 7265
ModelR 7265
WarrantyGoods are warranted against manufacturing defects for 1 year. In no case is Prime-Line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.

6. VALISY

 #ad

14", 18" and 20" Lengths, 12", Available in 10", VALISY 6 Pair of 12 Inch Full Extension Side Mount Ball Bearing Sliding Drawer Slides, 16"

#ad
VALISY #ad - Steel ball-bearing action slides that are ensure smooth and quiet performance. Made from high-grade cold rolled steel that is electrom zinc plated. Side mounted, non handed design, positive stop. Lever disconnect for easy drawer removal. 6 pair of drawer slides, enough for 6 drawers, 12 inch, Mounting screws included screws included. Note: the mounting brackets are not included.
BrandVALISY #ad
Manufacturervalisy #ad
Height0.43 Inches
Length11.81 Inches
Width1.77 Inches
Part NumberDrawer Slides in All Sizes 01

7. PRIME-LINE

 #ad

White, Nylon, PRIME-LINE R 7227 Rear Drawer Track Socket

#ad
PRIME-LINE #ad - Wide x 7/8 in. Easy installation – installation is quick and easy, and all fasteners are included. Per pair. Note - double check all measurements on your drawer slides before ordering.

Maximum load rating – the maximum load rating is 75 lbs. Durable – constructed of a thick, durable white plastic, these rear drawer track brackets are designed to last. Tall x 3 in. Socket depth allows for front to back adjustment of the drawer slides. Dimensions - 5/16 in. The 2-7/8 in. Deep openings. Support drawer glides – these rear drawer track back plates are used to support side mounted drawer glides.
BrandPRIME-LINE #ad
ManufacturerPrime-Line Products #ad
Height3 Inches
Length1.31 Inches
Weight0.14 Pounds
Width2.06 Inches
Part NumberR 7227
ModelR 7227
WarrantyGoods are warranted against manufacturing defects for 1 year. In no case is Prime-Line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.

8. N/ A

 #ad

6 Pair of 12 Inch Hardware Full Extension Side Mount Ball Bearing Sliding Drawer Slides

#ad
N/ A #ad - The design of nylon rubber at the end can offer less noise when it's on use, providing your family a silent home. Zinc plated finish. Cold rolled steel prevents it from rusting. 12 inch, 6 pairs and screws included. 1. 77'' in width. 05'' in thickness. 100 lb load capacity. Full extension. Durable for use. Lifetime warranty. 60-day money back guarantee. Any problems occur, please feel free to contact us first and we'll give you a best solution.
BrandN/ A #ad
ManufacturerN/ A #ad
Part NumberFT-12-6

9. Homode

 #ad

Adjustable for Closet Bypass Pocket Doors, Homode Barn Door Floor Guide Wall Mounted, 8 Setup Options Hardware, Flush Design Bottom Flat, Black, Sliding Barn Door Bottom Guide with Stay Roller

#ad
Homode #ad - Easy installation and Satisfaction Guarantee. Adjustable universal door guide - 8 assembly options accommodate doors with different thickness, up to 3" thick door. Generous size rollers - oversize rollers for better barn door contact and glide ease and silence. Compatible flushed design - guide bottom sits flat, flush mounted wall screws no scratching hanging barn doors. Heavy duty construction-Black Powder Coated finish ensures years of beauty and longevity.
BrandHomode #ad
ManufacturerHomode #ad
Weight1.21 Pounds
Part Number43237-2