As an Amazon Associate I earn from qualifying purchases.
1. Superior Pump #ad
Superior Pump 91570 1/2 HP Thermoplastic Submersible Utility Pump with 10-Foot Cord, Black #adSuperior Pump #ad
- Tough thermoplastic construction; 10' cord length. 1-1/2 inch npt discharge for high capacity pumping; includes 3/4 inch garden hose adapter; Amps:4. 9. 1/2 hp utility pump moves up to 3, 300 gallons per hour; pump will lift water up to 25' of vertical height.
Superior pumps are built to Last, engineered with quality components and are 100% factory tested. Removable suction screen and handles up to 3/8 inch solids.
2. Pedrollo #ad
115 Volts, Pedrollo Booster Water Pump, 634 GPH, Model Number PKm60, 1/2 HP #adPedrollo #ad
- Single-phase electric motor with thermal overload protection. Stainless steel motor shaft. Cast iron pump body with epoxy electro coating. Brass impeller with peripheral radial vanes. Aluminum motor bracket with brass insert.
3. LANCHEZ #ad
Portable Stainless Steel Water Transfer Draining Irrigation Pump for Water Removal, Lawn Fountain Pump 960 GPH 125 Feet Height, Lanchez 1/2 HP Shallow Well Garden Jet Pump #adLANCHEZ #ad
- Economic pumpthe sprinkler pump is a versatile pump for pressure boosting, lawn, small underground sprinkler systems, operating lawn sprinklers and a multitude of other general purpose applications. Operation warnning do not run the transfer pump before priming it, since the seal and impeller could be permanently damaged.
Remove the plug from the street tee and pour clean water into the unit until casing and suction line are completely filled. Maximum flow rate up to 960 GPH and Max lift water up to 125 feet.
Full corrosion-resistant and reinforced thermoplastic construction with thermal overload protection for continuous duty use in water removal application. Suitable use in garden, farm and rural house. Safety ensurethe draining irrigation pump pay attention to safety.
Installation noticethe garden pump should be installed in a dean, dry and ventilated location which provides adequate room for servicing and protection from freezing temperatures. It should be bolted to a good foundation, preferably concrete and provided adequate drainage. Corrosion-resistant stainless steel construction extends product life and is easy to clean. Strong and reliable performancethe shallow well pump with 1/2 HP motor.
4. Wayne #ad
WAYNE SWS50 1/2 HP Cast Iron Shallow Well Jet Pump #adWayne #ad
- Dual voltage 120v/240v high efficiency square flange motor factory set for 240V. 1/2 hp; max. Flow rate is 375 gallons per hour; 50 psi.
Pressure switch is pre-set at 30-50 psi for automatic operation. Assembled in the US with foreign and domestic parts. Durable cast iron volute with dedicated priming port for volute filling.
|Manufacturer||Wayne Water Systems #ad|
5. Superior Pump #ad
Black, Superior Pump 94525 1/2 HP Cast Iron Shallow Well Jet Pump Kit W/24L Tank, 1/2HP #adSuperior Pump #ad
- 1/2 hp shallow well jet with tank pumps water from well up to 25-vertical feet to lift; For use in shallow well applications up to 25-feet. Pre-mounted fully adjustable pressure switch and cast iron seal plate; Pre-mounted to 25l pressure tank.
Rugged cast iron construction; Tough thermoplastic impeller and glass filled thermoplastic diffuser. Superior pumps are built to Last, engineered with quality components and are 100% factory tested. Continuous duty, thermally protected split capacitor motor; Dual voltage motor 115/230V, cULus Listed.
|Brand||Superior Pump #ad|
|Manufacturer||Superior Pump #ad|
6. Star #ad
Includes Injector Kit, Star SJ10 1 HP Cast Iron Convertible Jet Pump for Deep or Shallow Wells, Dual Voltage #adStar #ad
- Includes injector and long venturi for deep well applications and short venturi for shallow well applications. Trouble-free, long life TEFC motor features quick and reliable priming.
1 hp cast iron convertible jet pump features dual voltage 115/230 motor with easy-change voltage switch. For single pipe wells 0-25 ft or two pipe wells 26-40 ft and has 1 Inch NPT discharge and 1-1/4 Inch inlet. Rugged cast iron jet pump and motor housing for long life.
7. Happybuy #ad
Happybuy Well Pump 1/2 HP Submersible Well Pump 164ft Head 25.5 GPM Stainless Steel Deep Well Pump for Industrial and Home Use #adHappybuy #ad
- Applicable condition: the water pump has no special requirement on well and water pipe, and if the pressure permit, steel pipe, ash pipe wells or soil wells, that means the pump can used in Steel pipe wells, hose or plastic pipe can be used as its water pipe.
Essential parameter: submersible pump voltage: 110v 50hz; the length of cable：5ft;applicable well diameter: 100mm / 4 inch; power: 037kw / 05hp; pump flow: 25. 5gpm; pump impeller: 4pcS; Pump highest head: 164ft.
Convenient operation: deep well pump with 5ft cable, and easy on Installation, combined motor and pump in one, it deep dive into the water to work. Small footprint well pump, use, maintenance, no needs of constructing pump room. Excellent performance: stainless steel body, Industrial grade heavy duty, a built in check valve（unsealed）, can be mounted vertically, also good for home usage.
Widely used:it is suitable for extraction from the deep wells for groundwater, railways, and can also be used in rivers, reservoirs, factories, but also for draining in cities, canals and other water lifting works. Mainly used in farmland irrigation and mountainous areas for human and animal using water, mines.
8. Wayne #ad
WAYNE PC4 1/2 HP Cast Iron Multi-Purpose Pump With Suction Strainer, Model:55832 #adWayne #ad
- Easy installation and easy handling. This pump is assembled in the USA with foreign and domestic parts. Generates up to 50 psi at outlet hose; generates up to 15 ft. The product is highly durable and easy to use. Of suction lift at inlet hose.
|Manufacturer||Wayne Water Systems #ad|
9. Hallmark Industries #ad
1/2 hp, 60 Hz, Stainless Steel, 25 GPM, Hallmark Industries MA0343X-4 Deep Well Submersible Pump, 110V, 4", 150' Head #adHallmark Industries #ad
- Pump, 25 gpm, stainless steel, 1/2hp, for 5" or bigger well, 110V 60HZ, deep well submersible Pump, long life. Use 115v power to run the pump. 110v is a nominal voltage - covers from 100 V to 130V. American company. This pump has a max head of 150feet, which is to pump into an open tank, not a pressure tank.
Please read the Pump Selection Guide provided under the product details. 2 wire pump with built in control box- dOES NOT require external control box; Industrial grade heavy duty, good for home usage; Built in thermal protection.
|Brand||Hallmark Industries #ad|
|Manufacturer||Hallmark Industries #ad|
|Warranty||One year manufacturer's warranty from the purchase date for parts and labor.|