Top 9 Arch Punch Set – Arch Punches

As an Amazon Associate I earn from qualifying purchases.

1. General Tools

#ad

General Tools 1271ST Arch Punch Set, 7 Piece Set, 1/4 Inch to 1 Inch

#ad
General Tools #ad - Heat treated forged steel. Hole diameters: 1/4 in, 3/4 in. 5/8 in. 3/8 in. 1/2 in. 7/8 in. Inside taper for clearance. And 1in. Plastic roll pouch.
BrandGeneral Tools #ad
ManufacturerGeneral Tools #ad
Height8 Inches
Length3 Inches
Weight0.32 Pounds
Width3.63 Inches
Part Number1271ST
Model1271ST

2. TEKTON

#ad

TEKTON 6588 Hollow Punch Set, 12-Piece

#ad
TEKTON #ad - Heat treated carbon steel construction. Hollow punches: 1/8, 3/16, 7/32, 1/4, 5/16, 5/8, 5/32, 7/16, 1/2, 9/16, 3/8, 3/4 in. Set includes: 12-pc. Cuts clean holes in gaskets, rubber, cardboard, leather, and other soft materials. Precision ground flute and cutting edge. Non-slip knurled handle grip.
BrandTEKTON #ad
ManufacturerTEKTON #ad
Height1.06 Inches
Length7.75 Inches
Weight2.2 Pounds
Width9.13 Inches
Part Number6588
Model6588
WarrantyAlways Guaranteed: [email protected]

3. Prima Causa

#ad

Prima Causa 13 in 1 Sharp Hollow Punch Tool Set Leather Kit Gasket Hole

#ad
Prima Causa #ad - To use the kit, screw the appropriate size of punch onto the handle and position the center of the spring loaded plunger. Make clean, plastic, copper, precise holes in leather, rubber and Cork.

13 interchangeable punch tips let you choose different size holes from 3/16" to 1-3/8". Strong heat treated steel punches; Soft, comfortable grip. Includes: 1 pin point punch shaft, sturdy abs molded case, sizes: 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4" 7/8" 1" 1-1/8" 1-1/4" 1-3/8". This punch kit comprises of a single handle, onto which screws a series of single interchangeable punches. Punch accurate washers and gaskets. Easy to punch holes in leather, Rubber, Copper, Plastic, Gasket Paper and Cork.
BrandPrima Causa #ad
ManufacturerPrima Causa #ad
Part NumberPC-0010

4. Anytime Tools

#ad

1-1/4", Anytime Tools 13 pc Sharp Hollow Punch Tool Set for Leather and Gasket 3/16"

#ad
Anytime Tools #ad - 13 punches: 3/16", 3/4", 7/8", 5/8", 1/2", 1-1/4", 7/16", 1-1/8", 1/4", 5/16", 1", 3/8", 1-3/8".1 pin point Punch Shaft. Sturdy aBS molded case.
BrandAnytime Tools #ad
ManufacturerAnytimeTools #ad
Height1.8 Inches
Length10.1 Inches
Weight2.45 Pounds
Width7.6 Inches
Part NumberAT201794
Model201794

5. Groz

#ad

Soft Material | 45+/-5 HRC 26441, Rubber, Canvas, Cardboard, Plastic, GROZ 7-Piece Arch Punch Set | Bell Type | Leather

#ad
Groz #ad - Only built to cut small holes of 3/16" to 2-3/4" diameter. Special design of cutting edge prevents jamming of material inside the punch. Cutting edge is induction hardened for extended life. Sizes include 3/16”, ¼”, 7/16”, 3/8”, 5/16”, ½”; Packed in Vinyl pouch. Used for punching round holes in gasket material, rubber, canvas, cardboard, plastic and other soft material.
BrandGroz #ad
ManufacturerGroz #ad
Part Number26441
Model26441

6. Rennsteig

#ad

Rennsteig 9-Piece Arch Punch/Wad Punch Set in roll-up pouch

#ad
Rennsteig #ad - Hole diameter 3-19mm in increments of 2mm. Cutting edge sharpened, hardened and temperd. 9-piece arch punch / Arch Wad Set in roll-up pouch. Made of tool steel according to DIN 7200 A. Made in Germany.
BrandRennsteig #ad
ManufacturerRennsteig #ad
Weight2.31 Pounds
Part Number140-900-0
Model140 900 0

7. Jarchii

#ad

Hole Punch Tools Set, 7Pcs DIY Hole Punch Tool Half Round 1/4 Arch Semicircle Punching Tool Puncher for Leather Crafts Belts Watchbands Bags Fine Material#1

#ad
Jarchii #ad - Includes 7 different sizes of punch head to meet your diverse needs. Suitable for leather crafts, watchbands, fine material, belts, bags, etc. The surface is exquisitely polished by hand with excellent workmanship, quickly and effortlessly in punching holes. Made of premium steel material, special process treatment, high hardness and good wear resistance. Good sharpness of cutting edge with fine grinding, sturdy and durable.
BrandJarchii #ad
ManufacturerJarchii #ad
Height0.39 Inches
Length0.39 Inches
Weight0.49 Pounds
Width0.39 Inches
Part NumberJarchiifiu6qzaeg9-01

8. Neiko

#ad

NEIKO 02614A Interchangeable Large Hollow Hole Punch Set | 10 Piece | Heavy Duty | Includes Tool Carrying Case

#ad
Neiko #ad - Includes: alternating hollow punch blade for wide range of application includes the following sizes: 3/16", 5/8", 25/32", 1/2", 3/8", 1/4", 5/16", 1" and 1/-1/4" hollow hole punches.

Precision: precisely machined and heat-treated blade with alloy steel construction resists corrosion and keeps blade sharp to provide excellent cutting performance. Design: built-in center punch/pilot tip in drive handle features a textured knurled surface to support a firm grip for easy and accurate positioning to execute clean cuts and holes. Convenience: high quality hollow punch kit comes with a plastic case that has a handle allowing for easy accessibility and is portable for on the go jobs. Versatile: multi-applicable and is most ideal on vinyl, gaskets, soft material, cardboard, copper, rubber, plastic, leather, and many more materials.
BrandNeiko #ad
ManufacturerRidgerock Tools Inc. #ad
Height1.38 Inches
Length9.06 Inches
Weight1.8 Pounds
Width5.51 Inches
Part Number02614A
Model02614A

9. General Tools

#ad

1 Inch, General Tools 1271M Arch Punch

#ad
General Tools #ad - Because of this heat treatment, the cutting edge will stay sharper longer. The internal punch features an inside taper for clearance. The punches are heat treated forged steel, ensuring long lasting performance. The general tools and instruments 1271M Arch Punch is the ideal punch tool for punching a 1 inch hole. The punch works on leather, sheet metal, plastic, rubber, gasket material, canvas, cardboard and softer metals.
BrandGeneral Tools #ad
ManufacturerGeneral Tools #ad
Height2.19 Inches
Length5.75 Inches
Weight0.04 Pounds
Width2.88 Inches
Part Number1271M
Model1271M