Top 8 Skeleton Key Mortise Lock – Door Lock Replacement Parts

As an Amazon Associate I earn from qualifying purchases.

1. PRIME-LINE

#ad

Reversible Latch Bolt, Antique Skeleton Key – Backset, PRIME-LINE E 2294 Vintage Style Indoor Mortise Lock Assembly Kit – Cast Steel Construction, Brass Plated Finish, 1/4” Max Square Spindle

#ad
PRIME-LINE #ad - Left or right-handed interior doors – the mortise caselock ships handed to close in a certain direction but the latch can easily be reversed for opposite swinging doors. Replace antique mortise lock sets – the vintage look of the prime-line e 2294 mortise lock assembly Kit is a great match for the old lock sets found in period homes.

Easy installation – installation is quick and easy, and all mounting screws are included. It has a 2-3/8” backset with a 9/32” square spindle drive that accepts a maximum spindle size of 1/4”. The kit includes a latch and deadbolt strike with fasteners door knobs, square spindle, spare keys and trim plates sold separately and two skeleton-style keys. Installation tip – although the square drive on the latch has a 9/32” opening, it will only accommodate 1/4” square spindles. Steel with brass-plated finish – the e 2294 lock is constructed from case-hardened steel and features a faceplate with a bright, brass-plated finish.

Used with antique and vintage door hardware, the kit is an economical replacement for indoor mortise locks. Note: these lock sets are for interior use only. The keys on these locks also known as skeleton keys do not have a stopping point like the traditional locks it does take time to learn hoe to use a skeleton key as the lock is unlocked form either side. The mortise lock easily slides into the existing door pocket for an fix for a broken lock.
BrandPRIME-LINE #ad
ManufacturerPrime-Line Products #ad
Height8.44 Inches
Length1.13 Inches
Weight0.79 Pounds
Width4.81 Inches
Part NumberE 2294
ModelE 2294
WarrantyGoods are warranted against manufacturing defects for 1 year. In no case is Prime-Line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.

2. Lucky Line

#ad

2 Pack, Lucky Line Skeleton Key 1 Flat 1 Notch Tip, Combo 87202

#ad
Lucky Line #ad - 128477 generic cuts - made to fit most antique door locks. 128477 material - made with brass plated zinc that will not bend under continuous use. In this type of system, a skeleton key lacks interior notches to interfere with or correspond with the wards, or master key, can open any of the locks within that system.

Measures 3-1/4" in length. 128477 large head - makes turning easy. Notch tip -intended for a lever lock—that is, or obstructions, a lock with a set of levers and wards—the skeleton key can push the levers to the correct height while bypassing the wards. 128477 flat tip & notch tip included - flat tip is intended for a warded lock—with a warded lock, each lock will still have its own key that corresponds with the wards; the skeleton key, thereby allowing it to open the lock. 128477 best use - on antique french doors or other antique door hardware.
BrandLucky Line #ad
ManufacturerLucky Line #ad
Height0.75 Inches
Length3.25 Inches
Width0.25 Inches
Part Number87202
Model87202

3. UNIQANTIQ HARDWARE SUPPLY

#ad

For House Doors with Mortise Locks | KY-30 1, Solid Brass Skeleton Key w/ Double Notched Bit

#ad
UNIQANTIQ HARDWARE SUPPLY #ad - Skeleton keys are truly trial and error. Please check barrel and bit dimensions before purchasing the door key. This door key replacement can be used as a master key for antique mortise and rim architectural locks. Overall length: 3 1/8”    Bit is: 3/8” X 3/8”. The package contains one skeleton key. The skeleton key is made of forged brass.
BrandUNIQANTIQ HARDWARE SUPPLY #ad
ManufacturerUNIQANTIQ HARDWARE SUPPLY #ad
Part Number43237-2

4. PRIME-LINE

#ad

Fits 1-3/8 in.-1-3/4 in. Interior Doors Satin Nickel, PRIME-LINE Defender Security E 2330 Mortise Keyed Lock Set with Satin Nickel Knob – Perfect for Replacing Broken Antique Lock Sets and More

#ad
PRIME-LINE #ad - Lock bolt key – this door lock set can be used as a privacy lock on bedrooms, bathrooms and other interior doors - the lock bolt is key activated from both the inside and outside.

New installation fit – this lock set is ideal for replacing broken lock sets on 1-3/8 in. 1-3/4 in. Replace antique lock sets – this e 2330 mortise lock set is the perfect choice for replacing broken knobs on old doors. Beautiful, satin nickel knob lock set - the e 2330 nickel knob set is ideal for replacing or updating interior door hardware. Interior doors. Left or right hand installations – the steel case mortise assemblies can be used for left or right hand installations, and can easily be installed. With a satin nickel finish, it’s a great choice for your next project.
BrandPRIME-LINE #ad
ManufacturerPrime-Line Products #ad
Height7 Inches
Length2.38 Inches
Width8 Inches
Part NumberE 2330
ModelE 2330
Warranty1 year limited

5. U ULTRA HARDWARE

#ad

Replaces Most Mortise Interior Locks from the Early 1900’s, Ultra Security 44609 Old Time Mortise Lock with Skeleton Key, Brass-Plated Finish

#ad
U ULTRA HARDWARE #ad - The edge face plate measures 7/8" x 5-1/2" and has a standard 1/4" square spindle. Easy installation: this door knob set comes complete with two 2-1/4" diameter faceted brass knobs, two 2-1/4" x 7" Escutcheon plates, spindle with screws and instructions.

Versatile design: mortise case cutout is 3-1/2" x 3" and features a 3/8" throw spring latch with 1/2" throw deadlock. For left- or right-handed use: This versatile mortise lock door knob is reversible for both left-and right-handed application. Old time style: designed to replace most mortise interior door locks used in the early 1900’s, the skeleton key lock exudes classic style and a traditional, brass-plated finish.
BrandU ULTRA HARDWARE #ad
ManufacturerHoward Berger Co., LLC #ad
Height2.25 Inches
Length7.5 Inches
Weight0.7 Pounds
Width7.9 Inches
Part Number44609
Model44609

6. UNIQANTIQ HARDWARE SUPPLY

#ad

Extra Large Brass Half Mortise Chest or Box Lid Lock w/Skeleton Key | S-12 with One Key

#ad
UNIQANTIQ HARDWARE SUPPLY #ad - The package contains one lock, one skeleton key and catch plate. Size: 1 1/2" from center of pin to left edge of lock. Overall size: 3" wide x 1 1/2" deep x 7/16" Thick; 7/8" from center of pin to lock face. High quality antique reproduction half mortise chest lock. Finish/material: Lock has solid brass plate with steel box. Easy to instal.
BrandUNIQANTIQ HARDWARE SUPPLY #ad
ManufacturerUNIQANTIQ HARDWARE SUPPLY #ad

7. UNIQANTIQ HARDWARE SUPPLY

#ad

Full Mortise Cabinet Door or Drawer Lock w/Plate and Skeleton Key, Antique Furniture Hardware | S-15S

#ad
UNIQANTIQ HARDWARE SUPPLY #ad - A high-quality reproduction of antique furniture lock. This lock can be used for drawers and right hand doors. Pin is centered 11/16" down from top of lock. This is a full mortise furniture lock can be used in old furniture. The package contains one lock with plate and key KY-3AB. Overall size: 1 7/16" High x 1" Wide. The lock is made of steel.
BrandUNIQANTIQ HARDWARE SUPPLY #ad
ManufacturerUNIQANTIQ HARDWARE SUPPLY #ad

8. UNIQANTIQ HARDWARE SUPPLY

#ad

Small Brass Half Mortise Chest or Box Lock w/Skeleton Key | S-8 with One Key

#ad
UNIQANTIQ HARDWARE SUPPLY #ad - A high-quality reproduction of antique furniture lock. 3/4" from center of pin to lock face       3/4" from center of pin to left edge of lock. Overall size: 1 1/2" wide x 1" Deep x 3/8" Thick. The package contains one lock, one catch plate, one key. The lock body is made of polished brass and steel. This lock can be used for lap desks, jewelry boxes, game boxes or any box with a hinged lid.
BrandUNIQANTIQ HARDWARE SUPPLY #ad
ManufacturerUNIQANTIQ HARDWARE SUPPLY #ad