Top 8 pressure Relief Valve 1 1/2 – Kitchen & Dining Features

As an Amazon Associate I earn from qualifying purchases.

1. Camco


Brown, Camco 10423 1/2" Temperature and Pressure Relief Valve with 4" Epoxy-Coated Probe

Camco #ad - Factory preset to 150 psi and 210 degrees Fahrenheit. 1/2" - 14 npt male inlet; 1/2" - 14 npT female outlet with 4" probe. Protects water heaters from excessive water temperatures and pressure. Csa certified. Resistant to corrosion.
BrandCamco #ad
ManufacturerCamco #ad
Height1.6 Inches
Length11.38 Inches
Weight0.55 Pounds
Width3.63 Inches
Part Number10423
Warranty1 year against manufacturing defects

2. Ultimate Washer


Compatible with Karcher 91840130, Inlet 1/2-Inch Male, Pump Saver Device, Ultimate Washer UW11-PW5D4S Thermal Relief Valve for Pressure Washers

Ultimate Washer #ad - Material: brass and Plastic flow directing cap. 1/2" mpt valve is mounted in bypass line; 1/8" FPT Discharge Side. Thermal relief valve is used to prevent a Pressure Washer Pump from Overheating if Running in Bypass for Extended Periods of Time. Valve opens at 140 degree discharging hot water from Pump and Allows Cool Water in; Automatically Resets at Cool Down to 115 Degree F. Universally fits 1/2" Bypass Lines.
BrandUltimate Washer #ad
ManufacturerUltimate Washer #ad
Part Number4336552405

3. Watts


Watts LF25AUB-Z3 Water Pressure Reducing Valve Union x NPT Female, 1 1/2 Inch, SS Seat

Watts #ad - Lead free copper silicon alloy with stainless steel strainer and corrosion resistant adjusting and cage screws, high-temperature diaphragm, replaceable seat module.

End connection options such as PEX, CPVC, and Quick-Connect. Water supply pressures range is 25 to 75 psi 172 to 517 kPa with the standard setting at 50 psi 345 kPa. The standard bypass feature permits the flow of water back through the valve into the main when pressures, due to thermal expansion on the outlet side of the valve, exceed the pressure in the main supply. Reduces incoming water pressure to protect plumbing systems and reduce water consumption in commercial industrial and residential applications.
BrandWatts #ad
ManufacturerWatts #ad
Height21 Inches
Length18 Inches
Weight0.12 Pounds
Width18 Inches
Part Number0009431

4. Acogedor


DN15 1/2" BSPP Brass Air Release Valve, for Solar Water Heater Pressure Relief, Automatic Air Vent Valve

Acogedor #ad - Feature of air vent valve - This valve features high temperature resistance, rust protection, reliably sealing. As long as the system has pressure, the exhaust valve will continue to vent.

Premium quality - the steam and water separation tray is designed with special structure to ensure that the water will not be discharged during exhaust. Powerful function - remove excess air during the operation of the exhaust system and hvac system. Stable performance - the exhaust mechanism is very reliable and is cast from high-precision components. Convenient- it is convenient to demount and maintenance, while the water in the system will not flow out, so there is no need to empty the system. It can be operated reliably, either when the system is running with water added or when the system pressure is too high and adequate drainage is required.
BrandAcogedor #ad
ManufacturerAcogedor #ad
Height0.39 Inches
Length0.39 Inches
Weight0.26 Pounds
Width0.39 Inches
Part NumberAcogedory4n9obc0tf

5. Camco


Camco 10471/10473 3/4" Temperature and Pressure Relief Valve with 4" Probe

Camco #ad - Brass body with stainless spring. Listed to ansi Z21. 22. Factory set at 150 PSI and 210F. 4" probe. 3/4" npt connection.
BrandCamco #ad
ManufacturerCamco #ad
Height11.38 Inches
Length1.5 Inches
Weight0.54 Pounds
Width3.63 Inches
Part Number10473
Warranty1 year against manufacturing defects

6. Tool Daily


Tool Daily Thermal Release Valve for Pressure Washer Pump, 1/4 Inch NPT, 2-Pack

Tool Daily #ad - Replaces homelite part numbers 678169004, karcher, Power Stroke, 194298GS and B3090GS. So it continues to operate at a safe temperature. When water temperature reaches above 145º F, pump seals may fail.

Fitting: 1/4" npt. Quick reply within 10 hours. Compatible with many brands, craftsman, black max, 21783gs, husky, homelite, briggs, 678169002 and 678169001. Thermal relief valve protects pressure washer pumps operating in a safe temperature range to prevent overheating. The outside diameter of male thread is 1/2 inch. Inlet pressure of pumps is 200 PSI. Any issue or question, please free to contact with us.

If the pump have ever overheated, the thermal relief valve must be replaced. The thermal relief valve will open to release hot water and allow cold water to enter the pump. Made of brass. Include 2 pieces pressure washer release valve. Replaces briggs and stratton parts 208673GS, such as Generac, Him Ore and Ridged pressure washers. Max.
BrandTool Daily #ad
ManufacturerTool Daily #ad
Height0.5 Inches
Length4 Inches
Width2 Inches

7. CMI


1" Tankless EcoSmart Brass Water Heater Isolation Service Flush Valve Kit with pressure relief valve,

CMI #ad - We ship same day, you can expect your order usually within 2-3 business days except national holidays and weekends. Compatibility: its 1" npt national pipe thread connection easily connects to most major tankless water heater brands! Maximum pressure rating: 125 psI; Temperature range: 40° to 180°F.

More for your money:the kit also comes with a 2” jet sweeper nozzle $6 value, a 3/4” FHT water pressure gauge $11 value, and a roll of PTFE tape with the following dimensions: 3/4” x 3. 5 mil x 520” $2. 50 value. Same/1 day handling time, using 1-3 days priority mail w. Tracking # and insured. Easy installation: Hot red handle and cold blue handle valves are color coded for easy identification.
BrandCMI #ad
ManufacturerCharman #ad
Part Number3008

8. Ei


150 PSI Air Compressor Safety Relief Pop Off Valve Solid Brass 1/2" Male NPT New

Ei #ad - Valve inlet threads: 1/2" male NPT measures about 3/4" in diameter. Total valve length: 2-3/4" Installation Wrench Size: 7/8". Certified 1/2" npt threaded 150 psi High CFM air compressor / tank pressure safety relief valve. This valve will relieve 278 SCFM. Features a silicone rubber soft seat relief valve to prevent leaks Max temperature: 250° F.
BrandEi #ad
Manufacturerconrador #ad
Part NumberSRV-150