Top 5 Cutmaster 60 40 Amp Tips – Plasma Cutting Equipment

As an Amazon Associate I earn from qualifying purchases.

1. Jack&Dave

#ad

Jack&Dave 100 Pcs Plasma Cutting Consumables Standard Fit Cut40 50 with Plasma Cutter Torch PT31 LG40

#ad
Jack&Dave #ad - Fit pt31-guN. For 40 50 amps Cutting Machine. Fits stahlwerk ct312, ct520, cut50, acdc tig200 plasma, ct512p with PT-31 GUN.100pcs plasma cutting consumables Common. Package include:10 pcs cup 30 pcs Electrodes 20 Pcs Ring 40 Pcs TipCommon.
BrandJack&Dave #ad
ManufacturerJack&Dave #ad
Part Numbers11
Model.

2. Donwind

#ad

Donwind 20pcs Plasma Cutting Electrode 9-8215 & Nozzle 9-8212 Tip 100A for Thermal Dynamics SL60 & SL100 Torch

#ad
Donwind #ad - 10 pieces x 9-8215 Plasma Cutting Electrode. Suitable for sl60 SL100 series plasma cutter torch. Plasma cutting amperage: 100A. 10 pieces x 9-8212 plasma Cutting Nozzle / Tip.
BrandDonwind #ad
ManufacturerDonwind #ad
Part Number12-15-20

3. DRELD

#ad

Replacement for Thermal Dynamics SL 60/100 Pack of 10, 5PCS 9-8215 Electrode & 5PCS 9-8207 Nozzle Plasma Torch Tips

#ad
DRELD #ad - Perfect match and Good Choice for Direct replacement of original parts. Not oem but quality exceeds OEM requirements. It's valuable to learn how to rework a machine that broke during the cutting process and still works hours after installation.

Pretty easy to snap into place. Strict quality control standards to Build and test. Premium quality: brand new & high-quality copper aftermarket consumable parts. Save much money off dealer prices. Include: 5pcs 9-8215 plasma torch electrode. 5pcs 9-8207 plasma torch nozzle. This only allows the copper components to be screwed in all ways to make a tight copper-copper connection. If you can't tighten the white cone all the time, the copper parts will not be tightly connected and will arc prematurely within the torch, the problem comes.

If this happens, damaging the copper head in seconds. Note: when you screw them in, there is an 8-inch gap between the white cone and the rest of the torch. Guarantee and service: the electrode and nozzle tip replacement Part completed with a One-year Warranty. That's fine. If the tig welding torch once failed on your pellet grills and smokers, simply contact us for a replacement or refund.
BrandDRELD #ad
ManufacturerDRELD #ad
Part Number9-8207
Model9-8207

4. Ws

#ad

WS SL60 SL100 Torch Start Cartridge 9-8213 9-8277 for Thermal Dynamics Cutmaster 38/52/82/102/152 Plasma Cutter Torch Consumables

#ad
Ws #ad - The start cartridge can fit cutmaster 102 / 152 plasma cutter which work with SL100 plasma torch. The start cartridge reference code : 9-8213 / 9-8277. This 9-8213 start cartridge are replacement parts which produced according to the standard size, and not original. Plasma consumable type : Start Cartridge. The start cartridge can fit cutmaster 38 / 82 plasma cutter which work with SL60 plasma torch; can fit CutMaster 58 / 52 / 60i plasma cutter which work with SL60QD plasma torch.
BrandWs #ad
ManufacturerWeldingStop #ad
Height1.18 Inches
Length1.18 Inches
Width1.18 Inches
Part Number9-8213 / 9-8277

5. PLAXCON

#ad

SL40 Consumables Electrode Tip Kit Thermal Dynamics Cutmaster 42 Plasma Cutter Torch QTY-25

#ad
PLAXCON #ad - 25pcs plasma cutting consumables kit: 10pcs electrode + 15pcs nozzle. The plasma cutting consumables can fit for thermal Dynamics CutMaster 42 Plasma Cutter SL40 Plasma Cutting Torch´╝ŤCAN NOT fit MC40 torch. Ws oemed plasma cutting torch Consumables which fit for thermal dynamics SL40 torch, not original. 10pcs plasma cutting Electrode, ref code 9-0096. 15pcs plasma cutting plasma cutting Drag Tip, ref code 9-0093, cutting current is 40A.
BrandPLAXCON #ad
ManufacturerSY WeldingStop #ad
Part NumberWSP-TDSL40-90093-25JA
Model9-0093 9-0096