Top 10 ZWave Dimmer Switch 3 Way – Dimmer Switches

As an Amazon Associate I earn from qualifying purchases.

1. Enbrighten

#ad

Compatible with Alexa, 3-Way Ready, 46204, Toggle, ZWave Hub & Neutral Wire Required, Enbrighten Z-Wave Plus Smart Light Dimmer with QuickFit and SimpleWire, Google Assistant

#ad
Enbrighten #ad - The dimmer is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Full-home coverage – z-wave plus works with all previous z-wave generations to allow continued expansion of your home-automation network.

Advanced design 2nd generation model – improved components reduced the housing depth by up to 20% compared to previous z-wave models and eliminated the need for heat tabs. Voice control – alexa and google assistant compatible requires a z-wave certified hub. Auto line-load sensing terminals support fast and easy installation by detecting line and load wires and configuring the dimmer accordingly. Quick fit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space. Operating temperature range 32-104 degrees Fahrenheit.

Works with the following z-wave certified hubs: smartthings, homeSeer, Harmony Home Hub Extender, Wink, Vivint, Honeywell, ADT Command, Nexia, ADT Pulse, Trane, Ring Alarm, Vera and more. Wallplate not included. Home automation is simple through custom scenes, personalized scheduling and convenient alerts. The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12728 or 46200 Full-range dimmability for use with dimmable LEDs and CFLs as well as incandescent and halogen bulbs.
BrandEnbrighten #ad
ManufacturerJasco Products Company, LLC #ad
Height4.13 Inches
Length1.13 Inches
Width1.75 Inches
Part Number46204
Model46204
Warranty5-year limited

2. Enbrighten

#ad

46203 + 1 Add-On Rocker Switch 46199, 3-Way Ready, ZWave Hub Required, Enbrighten Z-Wave Smart Rocker Light Dimmer, White & Light Almond, Works with Alexa, Repeater/Range Extender, Google Assistant

#ad
Enbrighten #ad - Supported voltage - 120VAC. Works with alexa for voice control hub required; Alexa device and hub sold separately. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups. Operating temperature range: 32-104° F 0-40° C. Space-saving housing design – improved components reduced the housing depth by up to 20 percent compared to previous Z-Wave models and eliminated the need for heat tabs.

Requires a z-wave certified gateway – compatible with the following z-wave certified hubs: smartthings, Trane, vivian, nexia, ADT Pulse, Harmony Home Hub Extender, Wink, Honeywell, Home Seer, Vera and Connect. All-in-one bundle – everything necessary to transform a traditional 3-way switch to a smart dimmer is included in the kit. Easy installation with simple wire – auto line-load sensing terminals on the dimmer support fast and easy installation by detecting line and load wires and configuring the dimmer accordingly.

Cannot connect directly with Echo plus Only ZigBee products can connect directly to Echo Plus. Wirelessly schedule, control and adjust the brightness of any dimmable wall or ceiling light - control from anywhere, at any time with any mobile device. Wireless range: Up to 150 feet. The ge-branded add-on switch allows the GE-branded Z-Wave Smart Dimmer to operate correctly in multi-switch installations and mirrors the functionality of the primary switch. Alexa compatible – requires an alexa supported hub for voice control with echo products alexa device and hub sold separately.
BrandEnbrighten #ad
ManufacturerJasco Products Company, LLC #ad
Height4.13 Inches
Length1.13 Inches
Width1.75 Inches
Part Number47865
Model47865
Warranty2-year limited warranty

3. Enbrighten

#ad

46203, Enbrighten Z-Wave Smart Rocker Light Dimmer with QuickFit and SimpleWire, Works with Alexa, ZWave Hub Required, Repeater/Range Extender, 3-Way Ready, White & Light Almond, Google Assistant

#ad
Enbrighten #ad - Includes white and light almond paddles wall plate not included. Up to four add-on switches can be connected to the same device. Full-range dimmability for use with dimmable LEDs and CFLs as well as incandescent and halogen bulbs. Versatile applications – control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON;OFF operation and brightness adjustment from the dimmer.

Auto line-load sensing terminals support fast and easy installation by detecting line and load wires and configuring the dimmer accordingly. Supported wattage – 600w incandescent; 300W LED;CFL. Supported voltage – 120VAC. Advanced design 2nd generation model – improved components reduced the housing depth by up to 20% compared to previous z-wave models and eliminated the need for heat tabs. Home automation is simple through custom scenes, personalized scheduling and convenient alerts. Easy installation – requires indoor in-wall installation with hardwired connections.

The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723 or 46199. Works with the following z-wave certified hubs: smartthings, harmony Home Hub Extender, ADT Command, Home Seer, Trane, Nexia, Ring Alarm, Vivint, Wink, ADT Pulse, Honeywell, Vera and more. Dual ground ports, support daisy-chaining in multi-switch setups. Quick fit enhancements are the ideal smart solution for older-style switch boxes, which are offset to avoid switch box mounting screws, multi-gang configurations or any other application with limited space.
BrandEnbrighten #ad
ManufacturerJasco Products Company, LLC #ad
Height4.13 Inches
Length1.13 Inches
Width1.75 Inches
Part Number46203
Model46203
Warranty2-year limited warranty

4. EVA LOGIK

#ad

Works with SmartThings, Wink, Z-Wave Plus Smart Dimmer Light Switch 3 Way | Built-in Z-Wave Repeater | Works with Existing Regular 3-Way Switch, Zwave Hub Required, Alexa ZW31

#ad
EVA LOGIK #ad - Alexa device and hub sold separately. Important: must have neutral wire for this to work, please check your wiring prior to purchasing. Provides best dimming capabilities, sylvania, works with most popular dimmable LED's including Cree, sunco, ecosmart, GE, Philips, and others.

Alexa compatible: requires an alexa supported hub for voice control with echo products. Built-in signal repeater that boosts connectivity between hub and devices. Affordable 3-way solution: work with regular 3-way switches, no special companion switch needed! Can be used with a regular ON/OFF non-smart switch NOTE: "Non-Smart" switch has to be an On/Off 3-Way, not a Dimming 3-Way. Requires a Z-Wave certified Hub. Only single and 3 way, not support 4 way! .
BrandEVA LOGIK #ad
ManufacturerEVA LOGIK #ad

5. Minoston

#ad

Works with SmartThings, Z-Wave Dimmer Light Switch, 3-Way Installation, Z-Wave Hub Required, in Wall Toggle Switch, WhiteMS13Z, Built-in Signal Repeater/Range Extender, Wink

#ad
Minoston #ad - It supports dimmable LED, CFL, incandescent and halogen bulbs. Cannot connect directly with ECHO PLUS. Voice control: this zwave toggle switch is compatible with alexa echo and google home. Wireless control: turn on/off, or group the light from multiple switches all with a smartphone app, schedule, automatically turn lights on when you are home, and off when you are away10%-100% dimmability.

Supported voltage - 120 VAC. Dimmer performance may differ from different bulbs. Work with: this z-wave enabled universal switch works for most residential lighting control. Requires an alexa supported hub for voice control with Echo Products.

Installation requires: hard-wired connections. Requires a z-wave certified gateway: the MS13Z is compatible with Samsung SmartThings, the Wink Hub, and all certified Z-Wave controllers. Neutral wire required for single-pole and 3-way installation Ca This Z-Wave switch works w/existing dumb switch for a 3-way wiring scenario.
BrandMinoston #ad
ManufacturerMinoston #ad

6. GE

#ad

Zwave Hub Required, 47338, Google Assistant, SmartThings, Works with Alexa, Repeater/Range Extender, Wink, 3-Way Ready, GE Enbrighten Z-Wave Plus Smart Light Dimmer with QuickFit and SimpleWire, White

#ad
GE #ad - Full-range dimmability for use with dimmable LEDs and CFLs as well as incandescent and halogen bulbs. Dual ground ports, support daisy-chaining in multi-switch setups. Works with the following z-wave certified hubs: smartthings, adt pulse, Trane, Home Seer, ADT Command, Harmony Home Hub Extender, Ring Alarm, Nexia, Vivint, Wink, Honeywell, Vera and more.

Neutral wire required. Quick fit enhancements are the ideal smart solution for older-style switch boxes, which are offset to avoid switch box mounting screws, multi-gang configurations or any other application with limited space. Versatile applications – control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation and brightness adjustment from the dimmer. Supported voltage – 120VAC. Operating temperature range 32-104 degrees Fahrenheit.

The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723 or 46199. Home automation is simple through custom scenes, personalized scheduling and convenient alerts. Extended signal range increases your home automation coverage to enhance your control. Full home coverage – z-wave plus works with all previous z-wave generations to allow continued expansion of your home-automation network. Easy installation – requires indoor in-wall installation with hardwired connections.
BrandGE #ad
ManufacturerJasco Products Company, LLC #ad
Height4.13 Inches
Length1.13 Inches
Width1.75 Inches
Part Number47338
Model47338
Warranty2-year limited warranty

7. Inovelli

#ad

Signal Indicator | Z-Wave Plus w/S2, 3-Way Smart Switch Technology, LED RGB Notifications, Inovelli ZWave Dimmer Switch Red Series | No Neutral Required | Energy Monitoring, Repeater

#ad
Inovelli #ad - Next gen features: unlimited RGB LED notifications, scene controller, & remote energy monitoring. About: in-wall smart dimmer switch that works w/ SmartThings, Vera / VeraPlus, Wink, Hubitat & more. No neutral required: Switch works without a neutral -- Please see listing pictures for limitations. Certifications: z-wave plus s2 enabled w/SmartStart Technology, Underwriters Lab UL, FCC, IC. Compatibility: must use a z-wave compatible HUB Ring, ISY, HomeSeer, etc to work with Alexa / Echo.
BrandInovelli #ad
ManufacturerInovelli #ad
Part NumberLZW31-SN

8. Enbrighten

#ad

Works with Alexa, Enbrighten Z-Wave Smart Rocker Light Switch with QuickFit and SimpleWire, Repeater/Range Extender, 46201, 3-Way Ready, ZWave Hub Required, White & Light Almond, Google Assistant

#ad
Enbrighten #ad - Includes white and light almond paddles wall plate not included. Home automation is simple through custom scenes, 46199, 12728, personalized scheduling and convenient alerts. Extended signal range increases your home automation coverage to enhance your control. Quick fit enhancements are the ideal smart solution for older-style switch boxes, which are offset to avoid switch box mounting screws, multi-gang configurations or any other application with limited space.

Full-home coverage - z-wave plus works with all previous z-wave generations to allow continued expansion of your home-automation network. Up to four add-on switches can be connected to the same device. The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723, or 46200 Easy installation – requires indoor in-wall installation with hardwired connections.

Neutral wire required. Versatile applications – control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON;OFF operation from the switch. Auto line-load sensing terminals support fast and easy installation by detecting line and load wires and configuring the dimmer accordingly. Advanced design 2nd generation model – improved components reduced the housing depth by up to 20% compared to previous z-wave models and eliminated the need for heat tabs. Operating temperature range 32-104 degrees Fahrenheit.
BrandEnbrighten #ad
ManufacturerJasco Products Company, LLC #ad
Height4.13 Inches
Length1.13 Inches
Width1.75 Inches
Part Number46201
Model46201
Warranty2-year limited warranty

9. myTouchSmart

#ad

2.4GHz, Neutral Wire Required, 3-Way/Single Pole, 40794, White & Light Almond, Works with Alexa, GE myTouchSmart WiFi Smart Light Dimmer, Google Assistant, No Hub Needed

#ad
myTouchSmart #ad - Voice commands – compatible with alexa and Google Assistant for the hands-free convenience of easy voice control with no hub required. Universal wi-fi – uses your 2.

User-friendly app – easy-to-use mytouchsmart app available in the Apple App Store and Google Play allows hassle-free remote operation of dimmable LEDs and CFLs as well as incandescent and halogen bulbs. Fast installation – space-saving screw terminals and metal yoke support fast, reliable installation – neutral wire required. 4ghz wi-fi network for scheduling, full-range dimming and ON/OFF operation from anywhere. Easy setup – one-touch presets, personalized my on/my off times and custom countdown options are simple to program and support any schedule.
BrandmyTouchSmart #ad
ManufacturerJasco Products Company, LLC #ad
Height4.06 Inches
Length1.75 Inches
Weight0.4 Pounds
Width1.75 Inches
Part Number40794
Model40794
Warranty1-year limited warranty

10. ZOOZ

#ad

No Add-Ons and NEW No-Flicker Dimming for all LED's up to 100W, Zooz Z-Wave Plus S2 Wall Dimmer Switch ZEN27 with NEW Simple Direct 3-Way and 4-Way Works with Existing On Off Switches

#ad
ZOOZ #ad - 2. 0 or higher selected hubs only. Lifetime tech support. Scene control added for VER. Smarter dimming: control your lights and adjust brightness remotely through z-wave. Intuitive wiring diagrams are printed in the manual look for more on Zooz website and if you need custom instructions, they'll create them for you! IMPORTANT: Make sure ALL boxes match the wiring diagrams in the manual before installing the switch.

Connection to power and NEUTRAL required check your boxes before buying. Works with all of the led's other dimmers flicker with 120 VAC only, no 0-10V control! Hub required sold separately, scroll down for compatibility. Simple direct 3-way & 4-way: use it with existing on/off switches no dimmers in your 3-way, 4-way, or 5-way set-up, even if load and line are not in the same box. Faster installation: it takes half the time to install zooz s2 switches in 3-way and 4-way set-ups than for any other Z-Wave solution.

Voice control only available with Alexa-compatible Z-Wave hub will NOT work directly with a smart speaker or voice assistant. Z-wave plus signal repeater, adjustable ramp rate if you have access to advanced features from your hub, instant status updates, adjustable LED indicator now straight from the switch paddle, and status recovery after power failure. Just put zooz in the box with power and neutral wires. Bonus features: double tap to go to full brightness single tap to last brightness level. Z-wave plus and eTL certified for communication and safety standards compliance.
BrandZOOZ #ad
ManufacturerZOOZ #ad
Part NumberZEN27
Model.