Top 10 WAYNE Sump Pump – Sump Pumps

Uncategorized
As an Amazon Associate I earn from qualifying purchases.

1. Wayne

 #ad

WAYNE CDU980E 3/4 HP Submersible Cast Iron and Stainless Steel Sump Pump With Integrated Vertical Float Switch

#ad
Wayne #ad - Stainless steel motor housing and rugged, cast iron pump base. Assembled in the US with foreign and domestic parts. 1-1/2 in. Of discharge lift. Vertical float switch, tested to 1 million cycles!4600 GPH at 10 ft. Npt discharge for compliance with building codes. Top suction pump design minimizes air locks and clogging from debris in bottom of sump pit. Assembled in us, with foreign and domestic components.
BrandWayne #ad
ManufacturerWayne Water Systems #ad
Height12 Inches
Length8 Inches
Weight24 Pounds
Width8 Inches
Part NumberCDU980E
Model58321-WYN3
Warranty5 Year Manufacturer's Warranty

2. Wayne

 #ad

Wayne WSS30VN Upgraded Combination 1/2 HP and 12-Volt Battery Back Up System

#ad
Wayne #ad - 12v dc back up pump moves up to 2900 gph at 0 feet of head, one of the highest performing DC pumps on the market. Sjtw power Cord. For use in 16 inch. Primary pump float switch tested to 1 million cycles, up to 10X more than competitors. *. Assembled in the US with foreign and domestic parts. New and upgraded wayne wss30V. Diameter or Larger Sump Basins. Ultra-quiet performance; 8 ft. Primary pump moves up to 5100 GPH at 0 feet of head. Completely pre-assembled and drop in ready. Protection when you need it, back up pump continues running when the power is out.
BrandWayne #ad
ManufacturerWAYNE #ad
Height14 Inches
Length23.5 Inches
Width18.25 Inches
Part Number50004-WYN1
ModelWSS30VN
Warranty3 year manufacturer

3. Wayne

 #ad

WAYNE CDU790 1/3 HP Submersible Cast Iron and Steel Sump Pump With Integrated Vertical Float Switch

#ad
Wayne #ad - Top suction strainer filters debris and protects pump from clogging. High performance; max. 8 ft water resisitant power Cord provides easy access to nearby GFCI protected outlet. High capacity 1-1/2" npt discharge. Of discharge lift. Mechanical float switch provides reliable operation and allows installation in sump basins 11" in diameter or larger. Assembled in the US with foreign and domestic parts. Cast iron pump housing for durability. Flow rate is 4600 gallons per Hour; 3060 GPH at 10 ft.
BrandWayne #ad
ManufacturerWayne Water Systems #ad
Height12 Inches
Length9 Inches
Weight16.4 Pounds
Width9 Inches
Part NumberCDU790
Model56137-WYN3
Warranty3 Years

4. Wayne

 #ad

WAYNE CDU800 1/2 HP Submersible Cast Iron and Steel Sump Pump With Integrated Vertical Float Switch

#ad
Wayne #ad - 1-1/2-inch discharges for maximum flow. Abrasion resistant Glass Reinforced Polycarbonate Impeller for Reliability. Ceramic mechanical seal for work in demanding environments. 1/2 hp submersible sump pump made of durable cast iron. Assembled in the USA with foreign and domestic parts. 3-year limited warranty. High performance; max. Flow rate is 5100 Gallons Per Hour.
BrandWayne #ad
ManufacturerWayne Water Systems #ad
Height12 Inches
Length9 Inches
Weight17.8 Pounds
Width9 Inches
Part NumberCDU800
ModelCDU800
Warranty3 Years

5. Wayne

 #ad

58321-WYN2, WAYNE CDU1000 1 HP Submersible Cast Iron and Stainless Steel Sump Pump with Integrated Vertical Float Switch

#ad
Wayne #ad - Csa agency approved. Fully submersible, 8 ft water Resisitant Power Cord provides easy access to nearby GFCI protected outlet. 1-1/2 in. Assembled in the US with foreign and domestic parts. Npt discharge. Assembled in the us with foreign and domestic parts. 1 hp; maximum flow rate is 6100 gallons Per Hour, 5100 GPH at 10 feet of discharge lift. Submersible cast iron and stainless steel sump pump with vertical float switch.
BrandWayne #ad
ManufacturerWayne Water Systems #ad
Height12 Inches
Length8 Inches
Width8 Inches
Part Number58321-WYN2
Model58321-WYN2
Warranty5 Year Manufacturer's Warranty

6. Wayne

 #ad

Wayne 57729-WYN1 EEAUP250 1/4 HP Automatic ON/OFF Electric Water Removal Pump

#ad
Wayne #ad - Submersible reinforced sealed thermoplastic construction. Voltage:120V. I switch technology turns pump on and off by sensing the presence of water; removes water down to 3/8 in. Can be left unattended to remove water. 1/4 hp; max. The water level must be at least 1-3/4 inches for the pump to cycle, prime, and operate. Of discharge lift. Of surface. Water levels less than 1-3/4 inches will not allow the impeller to contact water therefore no water will be pumped. Flow rate is 3000 gallons per hour; 1850 gph at 10 ft. Garden hose adapter.
BrandWayne #ad
ManufacturerWayne Water Systems #ad
Height12 Inches
Length6.5 Inches
Weight10 Pounds
Width6.5 Inches
Part NumberEEAUP250
Model57729-WYN1
Warranty1 Year Manufacturer's Warranty

7. Wayne

 #ad

WAYNE WWB WaterBUG Submersible Pump with Multi-Flo Technology,Yellow

#ad
Wayne #ad - Of surface, boats, stock tanks, virtually dry. Top discharge is perfect for tight spaces where water removal is needed; window wells, buckets, etc. Use the waterbUG to stop the bugs! For removing water from flooded basements, and even a 5 gallon bucket.

Assembled in the US with foreign and domestic parts. Side discharge is ideal for easy water removal from flat open surfaces: flat roofs, flooded basements, shower stalls, standing water in yard, etc. Max head. Removes water down to 1/16 in. Max. Corrosion resistant Brass discharge outlets, with tethered cap seals, fits any standard garden hose.

The pump should be unplugged once the water is no longer being moved, or pump will run dry. Flow rate is 1257 gallons per hour: 900 gph at 10 ft; 3/4 in. Multi-flo technology allows easy selection of the appropriate discharge for the application. 30 ft. Eliminate standing water in your yard, and the risk to attract mosquitos.
BrandWayne #ad
ManufacturerWayne #ad
Height10 Inches
Length11 Inches
Width11 Inches
Part NumberWWB
ModelWWB

8. Wayne

 #ad

WAYNE RUP160 1/6 HP Oil Free Submersible Multi-Purpose Water Pump

#ad
Wayne #ad - 1/6 hp; max. Removes water within 3/8 inch of surface. Flow rate is 3000 gallons per Hour; 1850 GPH at 10 ft. Discharge with 3/4 in.

Fully submersible. High flow rate, oil-free pump removes water down to 3/8 in. 1-1/4 in. Of surface. Pumps up to 3, 000 gallons per hour. Outlet Connection:Threaded female. Garden hose adapter. 1-year limited warranty. Corrosion resistant, sealed thermoplastic construction. Designed to perform in applications such as, Draining Flooded Basements, And Removing Water From Sinks, emptying Water Filled Boats, Stock Tanks And Flat Roofs.1/6-horsepower submersible utility water pump with energy efficient motor. Of discharge lift.
BrandWayne #ad
ManufacturerWayne Water Systems #ad
Height11 Inches
Length7 Inches
Weight8 Pounds
Width5 Inches
Part NumberRUP160
Model57719-REL1
Warranty1 Year

9. Wayne

 #ad

Wayne VIP50 1/2 HP Thermoplastic Portable Electric Water Removal Pump

#ad
Wayne #ad - Glass reinforced housing prevents rust. Removes water within 1/8-inch of surface. 1/2-horsepower submersible utility water pump can handle material up to 1/2-inch thick without clogging. 1-year limited warranty. Requires 2 5/8 inch of water to prime. Connects to garden hose with 3/4-inch adjustable discharge adapter.
BrandWayne #ad
ManufacturerWayne Water Systems #ad
Height10 Inches
Length6 Inches
Weight9 Pounds
Width6 Inches
Part NumberVIP50
Model57711-WYN1
Warranty1 Year

10. Wayne

 #ad

WAYNE ESP15 Battery Back-Up 12 Volt Sump Pump System

#ad
Wayne #ad - Requires one 40-ampere hour or one 75-ampere hour battery. Alarm sounds to notify you when the backup system is active. Corrosion resistant thermoplastic construction. 720-gallons per hour at 10-feet of lift and maximum flow is 1750 gallons per hour. 1-year limited warranty.
BrandWayne #ad
ManufacturerWayne #ad
Height13 Inches
Length17 Inches
Weight10 Pounds
Width11 Inches
Part NumberESP15
Model57609-WYN1
Warranty1 Year - Parts Only