Top 10 SDTC Tech Stainless Steel Blind Rivets 1/8 – Blind Rivets

As an Amazon Associate I earn from qualifying purchases.

1. SDTC Tech

#ad

SDTC Tech Stainless Steel Blind Rivets 1/8" x 3/16" 4-3 Open End Type Pop Rivet Grip Range 1/8-3/16 inch 50 pack

#ad
SDTC Tech #ad - Width apllication: suitable for both indoor and outdoor use, with excellent rust resistance in salt water than regular rivets. Material: body and mandrel all made in 304 Stainless Steel, don't worry about rusting any parts. High quality stainless Steel Rivets, never rust, good anticorrosion property. Package: 50 pcs 1/8" x 3/16" 4-3 304 Stainless Steel Blind Rivets. Body size: 1/8" x 5/16" diameter * length, Grip Range: 1/8" - 3/16".
BrandSDTC Tech #ad
ManufacturerSDTC Tech #ad
Part NumberH-RIVET-KK-4-3-50

2. BCP Fasteners

#ad

100 Qty 304 Stainless Steel Blind Rivets #6-10 3/16" Diameter x 5/8" Grip BCP182

#ad
BCP Fasteners #ad - 6-10 3/16" diameter, 0501 - 0625 grip. Recommended drill Size: #11. 191. Perfect For Corrosive Environments. 304 stainless Steel Rivet And Mandrel. Package of 100 Blind Rivets.
BrandBCP Fasteners #ad
ManufacturerBCP Fasteners #ad
Height0.5 Inches
Length4 Inches
Width6 Inches
Part NumberBCP182
ModelBCP182

3. BCP Fasteners

#ad

100 Qty 304 Stainless Steel Blind Rivets #4-8 1/8" Diameter x 1/2" Grip BCP167

#ad
BCP Fasteners #ad - Perfect For Corrosive Environments. 4-8 1/8" diameter, 0376 - 0500 grip. Package of 100 Blind Rivets. 304 stainless Steel Rivet And Mandrel. Recommended drill Size: #301285.
BrandBCP Fasteners #ad
ManufacturerBCP Fasteners #ad
Height0.5 Inches
Length4 Inches
Width6 Inches
Part NumberBCP167
ModelBCP167

4. Glarks

#ad

Railway, Glarks 120Pcs 3/16" x 5/8" Aluminum Body Steel Mandrel Dome Head Blind Rivets Set for Sheet Metal, Automotive, and Duct Work

#ad
Glarks #ad - Package include: set include 120pcs 3/16" x 5/8" rivets for your use, which diameter is 3/16"5mm, grip length is 5/8"16mm. Product feature: the blind rivets has a mandrel which permits the formation of an upset on the blind end of the rivet and expansion of the rivet shank during the setting to join the component parts of an assembly.

Great for joining plastic and thick fabric. Application: these rivets are perfect for joining all kinds of metal plate and pipe. Surface is smooth, easy to install, strong yet lightweight, will well match with the rivet gun.

Used for diy home uses, automotive, business, aviation, instruments, ductwork, elevator, furniture etc. Quality assurance: if you receive a defective product or have any problems during use, please feel free to contact us, we will provide return and exchange service at any time. Material: all the rivets are made of aluminum. Acid and corrosion resistance.
BrandGlarks #ad
ManufacturerGlarks #ad
Part NumberG-835

5. BCP Fasteners

#ad

100 Qty 304 Stainless Steel Blind Rivets #4-5 1/8" Diameter x 5/16" Grip BCP165

#ad
BCP Fasteners #ad - Perfect For Corrosive Environments. Package of 100 Blind Rivets. 304 stainless Steel Rivet And Mandrel. Recommended drill Size: #301285. 4-5 1/8" diameter, 0251 - 0312 grip.
BrandBCP Fasteners #ad
ManufacturerBCP Fasteners #ad
Height0.5 Inches
Length4 Inches
Width6 Inches
Part NumberBCP165
ModelBCP165

6. ALBANYCOUNTYFASTENERS

#ad

Pop Rivets 1/4 Inch Diameter #8 All Steel Blind Rivets 8-8, 1/4" x 1/2" Grip 0.376-0.500 Qty 100

#ad
ALBANYCOUNTYFASTENERS #ad - All zinc plated SBS Steel Construction. Flange diameter: 1/2 inch 0500 . Open end dome Head Pop Rivets. 8 1/4 inch Diameter. Drill hole size: f bit, 0257 - 0261.
BrandALBANYCOUNTYFASTENERS #ad
ManufacturerRAW Products Corp #ad

7. RAW PRODUCTS CORP

#ad

6-10, 3/16" x 5/8" Gap 0.501-0.625 Qty-25, POP Rivet 18-8 Stainless Steel

#ad
RAW PRODUCTS CORP #ad - The mandrel side of the rivet, will leave the domed head exposed. Dome head rivets are mainly used in applications where there is no access to the rear blind side of the joint.

Rivets have a two piece construction; one is called the rivet hat and mandrel. Rivet size and grip range is measured in installed length. Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint. Domed head rivets are the most common type of rivets. Upon reaching the designed clamping force, once the mandrel is removed, the mandrel snaps and is discarded. Both the hat and mandrel are pre-assembled and ready to use.
BrandRAW PRODUCTS CORP #ad
ManufacturerRAW PRODUCTS CORP #ad
Part Number717029197719

8. ALBANYCOUNTYFASTENERS

#ad

Stainless Steel Pop Rivets 1/4 Diameter #8 All 304 Stainless Steel Blind Rivets 8-8, 1/4" x 1/2" Grip 0.376-0.500 QTY 100

#ad
ALBANYCOUNTYFASTENERS #ad - Flange diameter: 1/2 inch 0500 Drill hole size: f bit, 1/4" hole 0257 - 0261. All 304 stainless steel construction for Long Lasting Applications - Excellent Corrosion & Rust Resistance. Rivet diameter: 1/4 inch #8, 0250 inch. Open end dome head Pop Rivets Blind Rivets.
BrandALBANYCOUNTYFASTENERS #ad
ManufacturerRAW Products Corp #ad

9. Fullerkreg

#ad

Blind Rivets, for 0.126"-0.187" Material Thickness,18-8 Stainless Steel by Fullerkreg, 5/32" Diameter x 0.362" Lg50 Pack, Domed Head

#ad
Fullerkreg #ad - Length lg: 0362" inch. Metric or Imperial?: Imperial. Details. A2 stainless steel, also known as 18-8 or 304 Stainless Steel. Grip length: 0126"-0187". Rivet diameter d: 5/32" Dia.
BrandFullerkreg #ad
ManufacturerFullerDongluo #ad

10. Fullerkreg

#ad

Domed Head, 5/32" Diameter x 0.425" Lg50 Pack, for 0.188"-0.25" Material Thickness,18-8 Stainless Steel by Fullerkreg, Blind Rivets

#ad
Fullerkreg #ad - Grip length: 0188"-025". Length lg: 0425" inch. Rivet diameter d: 5/32" Dia. Metric or Imperial?: Imperial. Details. A2 stainless steel, also known as 18-8 or 304 Stainless Steel.
BrandFullerkreg #ad
ManufacturerFullerDongluo #ad