Top 10 Saw Blade For Laminate Flooring – Circular Saw Blades

As an Amazon Associate I earn from qualifying purchases.

1. Diablo

#ad

And Wood Saw Blade 12-Inch Diameter 96t TCG 1-Inch Arbor, Freud D1296L Diablo Melamine, Laminate Flooring

#ad
Diablo #ad - Special tico carbide formula offers a blend of carbide with low Cobalt content that produces a very "hard" carbide for long cutting life. Freud's limited Lifetime Guarantee. Features freud's perma-shield coating, Heat Expansion slots, Anti-Vibration reeds, and Laser Cut technologies. This blade features a thin kerf triple chip design that is specially designed to cut laminate flooring Pergo, Swiftlock, Armstrong, double-sided laminates and melamine cleanly. Ideal for sliding mitre saws and underpowered table saws. Thin kerf design to increase machine performance.
BrandDiablo #ad
ManufacturerFreud #ad
Height15.6 Inches
Length0.25 Inches
Width13.9 Inches
Part NumberD1296L
ModelD1296L
WarrantyNone

2. Makita

#ad

Makita A-93681 10-Inch 80 Tooth Micro Polished Mitersaw Blade

#ad
Makita #ad - Ideal for: harwood, Softwood, and Plywood. Micro-grain carbide teeth are Honed with up to 600 Grit for a Mirror Finish. Fully hardened and expertly Hand Tensioned Steel Saw Plates for True Cuts. Fine Crosscutting. Ultra thin kerf. 091", 5 degree Hook Angle, and. 071 plate Thickness.
BrandMakita #ad
ManufacturerMakita #ad
Height0.2 Inches
Length12 Inches
Weight5 Pounds
Width11.8 Inches
Part NumberA-93681
ModelA-93681
Warranty1 Year, 30 Day

3. BOSCH

#ad

Bosch DCB1072 Daredevil 10-Inch 72-Tooth Laminate Flooring, Laminated Panels and Melamine Circular Saw Blade

#ad
BOSCH #ad - Quality manufacturing – features the best materials and innovative engineering. Extra-hard steel blade body – delivers accuracy and resists bending and deflection for true cuts.

Triple chip grind tooth geometry – designed for delivering maximum performance and high quality of finishing in highly abrasive materials. Edge blades – developed for extreme performance for specific material and application. Thinner kerf – provides faster cuts and less waste. Brute carbide – an upgraded C3/C4 micrograin formulation for increased impact damage resistance and long life. Special negative hook angle – eliminates chipping and extends blade life.
BrandBOSCH #ad
ManufacturerBosch #ad
Height0.31 Inches
Length12 Inches
Weight1.8 Pounds
Width14 Inches
Part NumberDCB1072
ModelDCB1072

4. Skil

#ad

SKIL 75540 4-3/8-Inch by 40T Carbide Flooring Blade

#ad
Skil #ad - For use with skil 3600-02 Flooring Saw. Great for cutting laminate floor, solid wood floor, and engineered wood floor. Easy to use. The product is manufactured in China. The product is 4-3/8" 40T Carb Blade. For miter and rip cutting.
BrandSkil #ad
ManufacturerChervon- SKIL #ad
Height0 Inches
Length0 Inches
Width0 Inches
Part Number75540
Model75540
Warrantynone

5. Freud

#ad

Freud D1012LF PCD Laminate Flooring Blade

#ad
Freud #ad - Laser-cut anti-vibration design reduces vibration and Stabilizes the blade. Polycrystalline diamond PCD teeth with unique tooth geometry delivers over 75 times longer cutting life. High-tech anti-Kickback design re-enforces the tooth for longer life.
BrandFreud #ad
ManufacturerFreud #ad
Height0.25 Inches
Length14 Inches
Weight1.65 Pounds
Width12 Inches
Part NumberD1012LF
ModelD1012LF
WarrantyNone

6. DEWALT

#ad

DEWALT DWA3193PCD Fiber Cement/Laminate Saw Blade, 7-1/4"

#ad
DEWALT #ad - 7-1/4" diameter, 5/8" Arbor. Featuring diamond Tooth; synthetic polycrystalline diamond tipped teeth. Designed for cutting fiber cement and laminate/prefinished flooring.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height8.75 Inches
Length0.5 Inches
Weight0.26 Pounds
Width9.75 Inches
Part NumberDWA3193PCD
ModelDWA3193PCD

7. Freud

#ad

Freud D1084L 10-Inch Diameter 84t TCG Saw Blade with 5/8-Inch Arbor

#ad
Freud #ad - Ideal for sliding mitre saws and underpowered table saws. This blade features a thin kerf triple chip design that is specially designed to cut laminate flooring Pergo, Armstrong, Swiftlock, double-sided laminates and melamine cleanly. Features freud's perma-shield coating, Anti-Vibration reeds, Heat Expansion slots, and Laser Cut technologies. Freud's limited Lifetime Guarantee. Special tico carbide formula offers a blend of carbide with low Cobalt content that produces a very "hard" carbide for long cutting life. Thin kerf design to increase machine performance.
BrandFreud #ad
ManufacturerFreud #ad
Height12 Inches
Length5.25 Inches
Weight1.8 Pounds
Width14 Inches
Part NumberD1084L
ModelD1084L
WarrantyFreud's Limited Lifetime Guarantee

8. BOSCH

#ad

Bosch T503 3-Piece Hardwood/Laminate Flooring T-Shank Jig Saw Blade Set

#ad
BOSCH #ad - Blades are optimized for straight and curved cuts in hardwood and laminated flooring. 3 piece set. Includes two t101bf clean for hardwood, and one T101AOF special for laminate. Bi-metal construction for durability and long life.
BrandBOSCH #ad
ManufacturerBosch #ad
Height6.65 Inches
Length0.3 Inches
Weight0.2 Pounds
Width2.1 Inches
Part NumberT503
ModelT503
Warranty30 day money back guarantee, 1 year manufacturer warranty

9. Freud

#ad

Freud D1216LF PCD Laminate Flooring Blade

#ad
Freud #ad - Polycrystalline diamond PCD teeth with unique tooth geometry delivers over 75 times longer cutting life. Laser-cut anti-vibration design reduces vibration and Stabilizes the blade. High-tech anti-Kickback design re-enforces the tooth for longer life.
BrandFreud #ad
ManufacturerFreud #ad
Height0.25 Inches
Length16 Inches
Width14 Inches
Part NumberD1216LF
ModelD1216LF
WarrantyNone

10. Overpeak

#ad

Overpeak 10-Inch Table Saw Blade ATB Ultra Fine Finishing 90 Teeth Wood Cutting Circular Saw Blades

#ad
Overpeak #ad - Alternate-top bevel teeth - The 10 inch saw blade with unique tooth design provides straight cuts and cutting smoother. Machine use - framing saw blade is great for circular saw, table saw, miter saw.

Material - overpeak saw blades made of tougher tungsten carbide for up to 5x longer cutting life than other saw blades. Low noise & cutting stable - 6 laser cut expansion slots and 4 Laser-cut stabilizer vents trap noise and vibration, keeping it cool and reducing blade warp. General usage - the overpeak 10 inch carbide blade is 90 tooth and suitable for ripping wood, crosscuts wood, plywood, and laminate. Rpm up to 6000 .
BrandOverpeak #ad
ManufacturerOverpeak #ad
Part NumberFD10INCH90T