Top 10 No-Clean Solder Wick – Welding Equipment & Accessories

As an Amazon Associate I earn from qualifying purchases.

1. NTE Electronics

#ad

NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098" Width, 10' Length

#ad
NTE Electronics #ad - Available with standard or anti-static bobbins. 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder. Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes. Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board.
BrandNTE Electronics #ad
ManufacturerNTE Electronics, Inc. #ad
Weight0.05 Pounds
Part NumberSW02-10
ModelSW02-10

2. Hotop

#ad

1.5 meter Length Blue, 0.1 Inch Width, 6 Pieces Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks

#ad
Hotop #ad - Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.

No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards. Wide applications: the braided solder wicks are suitable for labs, practical tools to remove solder and correct errors on small PCB boards, home and industry welding work, bringing lots of convenience for your work.

What you get: come with 6 packs of no-clean solder wicks, each wick is about 2. 5 mm/ 01 inch in width and 1. 5 m/ 5 feet long, enough quantity and length for your daily needs. Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency.
BrandHotop #ad
ManufacturerHotop #ad
Height1.57 Inches
Length2.76 Inches
Width3.94 Inches
Part NumberHotop-Solder Wicks-0140

3. MG Chemicals

#ad

0.075" Width x 5' Length, Green, MG Chemicals 425-NS #3 No Clean Super Wick Desoldering Braid

#ad
MG Chemicals #ad - High purity, oxide-free copper. Environmentally and PCB safe residues. Conforms to mil-f-14256e rma flux and J-STD-004. Nsf, nonfood compounds program Listed P1, NSF Registration #144209. Esd electrostatic dissipative safe for 1. 5 m 5 ft bobbins.
BrandMG Chemicals #ad
ManufacturerMG Chemicals #ad
Height0.39 Inches
Length1.57 Inches
Weight0.02 Pounds
Width1.57 Inches
Part Number425-NS
Model425-NS
Warranty[email protected]

4. NTE Electronics

#ad

25' Length, NTE Electronics SW02-25 No-Clean Solder Wick, 4 Blue.098" Width

#ad
NTE Electronics #ad - Available with standard or anti-static bobbins. Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on type-r fluxes. 100 percent copper wick has fine braid design to promote strong capillary action to pull in excess solder. Residue left behind is halide free and non-conductive, so it does NOT have to be cleaned off the board.
BrandNTE Electronics #ad
ManufacturerNTE Electronics, Inc. #ad
Weight0.1 Pounds
Width4 Inches
Part NumberSW02-25
ModelSW02-25

5. Youland

#ad

2 Packs Solder Wick No-Clean Desoldering Wick Braid + Desoldering Pump Removal Tool + Micro Wire Cutter Steel Plier Cutting for Electronics

#ad
Youland #ad - Just contact us freely, we guarantee you 100% satisfaction. What you get from this solder kit : this package include 1 * electronic soldering sucking pump + 1 * Electronic wire Cutter + 2 * Desoldering wick, and We accept return, refund and replacement if you have any quesitons about the welding Items.

No-clean copper braid desoder wick : has excellent performance in desoldering, Anti-oxidation stability and anti-corrosion ability, This desoldering braid can quickly absorbed molten solder and left a clean working area, very convenient. Powerful suction desoldering pump : good suction, reduce clogging; Only one hand can easy operated with comfortable hold feeling, it will help you do better in soldering work.

Ideal choice soldering accessories Kit : Contains 4 packs of the most essential products for welding, soldering. Multifunctional & durable steel wire cutter : the jaws are constructed of a high strength steel alloy, provides for resistance to rust and corrosion; Easy handling insulate grips comfortable for operation; Used in soldering, jewelry processing, model making and fishing, electronic device repair, etc.
BrandYouland #ad
ManufacturerYouland #ad
Part NumberRS-0006

6. MIKIMIQI

#ad

0.1 Inch Width 1.5 Meter Length for Each Solder Wick, MIKIMIQI Solder Wicks, 2 Pack No-Clean Solder Braided Wicks Desoldering Wicks Solder Removal Tool

#ad
MIKIMIQI #ad - Solder braided wicks - the solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time.

Applicable occasions - the no-clean desoldering wicks are suitable for industry welding, labs work or home work. Not only improves work efficiency, but also does not damage the PCB board. Package include - you will get 2 packs No-Clean Solder Braided Wicks. Premium material - the braided desoldering wicks are made of 100% copper wires with fine braid design. Using flat stitch weaving, fast heat conduction, strong capillary action to pull in excess solder. Appropriate size - the size of each solder wick is 2. 5mm x 1. 5m / 01inch x 5 ft.
BrandMIKIMIQI #ad
ManufacturerMIKIMIQI #ad
Height0.7 Inches
Length2.5 Inches
Width2.5 Inches
Part NumberA12-402

7. MG Chemicals

#ad

454-NS Desoldering Braid #4 No Clean Super Wick Desoldering Braid, Blue, 0.1" Width x 50' Length, MG Chemicals

#ad
MG Chemicals #ad - Flux residue is non-conductive and non-corrosive. Disclaimer: color may vary slightly according to screen settings and resolution. Static free bobbins. No clean super wick. High sir-meets the requirements of both the bellcore specification TR-TSY-000078 and IPC test method III. Flux residue remaining on board does not have to be cleaned.
BrandMG Chemicals #ad
ManufacturerMG Chemicals #ad
Height0.8 Inches
Length3 Inches
Weight0.11 Pounds
Width3 Inches
Part Number454-NS
Model454-NS
Warranty[email protected]

8. NTE Electronics

#ad

NTE Electronics SW03-10 No-Clean Solder Wick with Anti-Static Bobbin, 3 Green.075" Width, 10' Length

#ad
NTE Electronics #ad - Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on type-r fluxes. Available with standard or anti-static bobbins. 100 percent copper wick has fine braid design to promote strong capillary action to pull in excess solder. Residue left behind is halide free and non-conductive, so it does NOT have to be cleaned off the board.
BrandNTE Electronics #ad
ManufacturerNTE Electronics, Inc. #ad
Weight0 Pounds
Width3 Inches
Part NumberSW03-10
ModelSW03-10

9. goot

#ad

GOOT Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks With RMA Flux,65'Length x 0.12"Width

#ad
goot #ad - Safety and variety -- use at ease. Brand history -- founding in 1965, goot had captured a 60 per cent share of Japan’s domestic market for soldering products and for almost 50 years has been providing customers with a wide range of high quality and easy-to-use soldering products.

 . Our thin and soft desoldering wire’s flat braid has efficient thermal transmission. Removes solder faster with better heat response than previous wicks. Any problems can be contacted by email. 100% satisfaction guarantee -- you can return the undamaged product and packaging without any reason within 30 days. It not only help you improve efficiency and quality, also more environmentally friendly. Recommended for lead-free solder with high heating load.

Size - 65'length x 012"width. Good quality -- solder wire with flat needle type preparation, fast heat transfer, soft design, suitable for fast absorption. High efficiency -- high performance solder absorbing wire precision preparation with copper wire and special chemical formula, suitable for precision instruments RMA corresponds to the use of standard flux. No fluorine, low residue, suitable for a variety of PCB circuit boards.
Brandgoot #ad
ManufacturerTAIYO ELECTRIC IND.CO.,LTD. #ad
Part NumberCP-30B

10. MIKIMIQI

#ad

3 Pack No-Clean Solder Braided Wicks Desoldering Wicks Solder Removal Tool, MIKIMIQI Solder Wicks, 0.1 Inch Width 1.5 Meter Length for Each Solder Wick

#ad
MIKIMIQI #ad - Applicable occasions - the no-clean desoldering wicks are suitable for industry welding, labs work or home work. Not only improves work efficiency, but also does not damage the PCB board.

Solder braided wicks - the solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time. Appropriate size - the size of each solder wick is 2. 5mm x 1. 5m / 01inch x 5 ft. Package include - you will get 3 packs No-Clean Solder Braided Wicks. Premium material - the braided desoldering wicks are made of 100% copper wires with fine braid design. Using flat stitch weaving, fast heat conduction, strong capillary action to pull in excess solder.
BrandMIKIMIQI #ad
ManufacturerMIKIMIQI #ad
Height0.7 Inches
Length2.5 Inches
Width2.5 Inches
Part NumberA12-403