Top 10 MSA Hard Hat Full Brim – Hard Hats

As an Amazon Associate I earn from qualifying purchases.

1. MSA

#ad

Made of Phenolic Resin, MSA 475407 Skullgard Full-Brim Hard Hat with Fas-Trac III Ratchet Suspension | Non-slotted Hat, Radiant Heat Loads up to 350F, Standard Size in Natural Tan

#ad
MSA #ad - A smooth crown allows for the easiest use of all MSA welding equipment. Variety of sizes & colors: comes available in a large variety of colors and sizes with custom imprinting and striping options. These caps have been fully third-party tested and certified by SEI.

This date does not indicate a helmet’s service life; the service life begins when it is placed into service. See attached FAQ sheet. Date codes are molded into the underside of the shell’s brim with the year and month in which that specific shell was manufactured. High quality protection: intended for general purpose use or in places elevated temperatures. Ratchet comfort pad is contoured to the back of the head, improving airflow and preventing hair-pulling. With custom logo options and any of 27+ different reflective and retro-reflective stripes, MSA gives the ultimate experience in hardhat customization.

Flush rear lug attachments eliminate pressure points and three levels of nape strap adjustment give for a fully customized fit. Ensure continued wear with drastically improved comfort and a graspable ratchet. Meet the voluntary standard for reverse donning, and Hi-Viz HV. Use skullgard helmets in steel mills, open-pit mining, welding, rubber manufacturing, and steam tunnels.
BrandMSA #ad
ManufacturerMSA Safety #ad
Height12.24 Inches
Length6.22 Inches
Weight0.99 Pounds
Width10.59 Inches
Part Number475407
Model475407

2. MSA

#ad

Standard Size in Black, MSA C217374 V-Gard Full-Brim Hard Hat With Fas-Trac III Ratchet Suspension | Polyethylene Shell, Superior Impact Protection, Self Adjusting Crown Straps

#ad
MSA #ad - Ensure continued wear with drastically improved comfort and a graspable ratchet. Slotted for accessory use: this high-quality msa v-gard helmet comes slotted for use with a variety of MSA accessories. Flush rear lug attachments eliminate pressure points and three levels of nape strap adjustment give for a fully customized fit.

High quality protection: v-gard full-brim hats are made from high-density polyethylene with a UV inhibitor for superior top impact protection. Fas-trac iii suspension: designed based on opinions and input from hundreds of customers, our top-end Fas-Trac III suspension functions as an improved ratchet suspension. For use in general industry and manufacturing markets, or those featuring electric/utilities, or oil, construction, gas and petrochemical work. Ratchet comfort pad is contoured to the back of the head, improving airflow and preventing hair-pulling.

These v-gard caps have also been fully third-party tested and certified by SEI. Variety of sizes & colors: comes available in a large variety of colors and sizes with custom imprinting and striping options. With a collection of 100+ accessories, ranging from sun shades and shields to liners and lamps, your helmet will always be fit for whatever task is at hand. Meets professional standards: v-gard protective caps meet or exceed all applicable requirements for a Type I top impact helmet as outlined in ANSI/ISEA Z89. 1-2014 class e and CSA Z94.
BrandMSA #ad
ManufacturerMSA #ad
Height1 Inches
Length1 Inches
Weight0.95 Pounds
Width1 Inches
Part NumberC217374
ModelC217374

3. Texas America Safety Company

#ad

MSA V-Gard Full Brim Hard Hats w/FasTrac III Suspensions with Handy Tote Bag, White

#ad
Texas America Safety Company #ad - Offers the finest combination of safety, personal comfort and value in head protection. Perfect for most industrial settings. Provides a combination of strength, affordability and comfort. Made in the USA. Meets ansi z89. 1-2014 class e, type i and canada csa z94. 1-2005 class e, Type I.
BrandTexas America Safety Company #ad
ManufacturerMSA #ad

4. MSA

#ad

Standard Size in White, Superior Impact Protection, MSA 10058321 V-Gard Full-Brim Hard Hat With 1-Touch Suspension | Polyethylene Shell, Self Adjusting Crown Straps

#ad
MSA #ad - These v-gard caps have also been fully third-party tested and certified by SEI. Variety of sizes & colors: comes available in a large variety of colors and sizes with custom imprinting and striping options. Slotted for accessory use: this high-quality msa v-gard helmet comes slotted for use with a variety of MSA accessories.

With a collection of 100+ accessories, ranging from sun shades and shields to liners and lamps, your helmet will always be fit for whatever task is at hand. Meets professional standards: v-gard protective caps meet or exceed all applicable requirements for a Type I top impact helmet as outlined in ANSI/ISEA Z89. 1-2014 class e and CSA Z94. 1-2014 class E. With custom logo options and any of 27+ different reflective and retro-reflective stripes, MSA gives the ultimate experience in hardhat customization.

Also has adjustable dual nylon straps for maximum comfort customization. This suspension allows you to do this safely by being easily adjustable for a secure, comfortable fit. For use in general industry and manufacturing markets, or oil, construction, or those featuring electric/utilities, gas and petrochemical work. This system features a one-handed squeeze opening, and snap closure. 1 touch suspension: when on the site, slide adjustment, you often feel the need to readjust your helmet for a comfortable fit.
BrandMSA #ad
ManufacturerMSA #ad
Height15.04 Inches
Length24.96 Inches
Width22.36 Inches
Part Number10058321
Model10058321

5. MSA

#ad

MSA Advance Full Brim Vented Hard Hats with 4 Point Ratchet Suspensions White

#ad
MSA #ad - Vented design provides comfort and protection. Features ratchet suspension, so you can make quick adjustments and get an optimal fit. Full brim offers full coverage protection. Offers the finest combination of safety, personal comfort and value in head protection. Meets ansi ansi/isea z89. 1-2014 safety regulations.
BrandMSA #ad
ManufacturerMSA #ad

6. MSA

#ad

Standard Size in White, MSA 10167911 V-Gard 500 Full-Brim Hard Hat With Fas-Trac III Ratchet Suspension | Polyethylene Shell, Superior Impact Protection, Self Adjusting Crown Straps

#ad
MSA #ad - With custom logo options and any of 27+ different reflective and retro-reflective stripes, MSA gives the ultimate experience in hardhat customization. Ensure continued wear with drastically improved comfort and a graspable ratchet. High quality protection: v-gard vented 500 protective hats are made with high density polyethylene for maximum protection.

For enhanced protection, there is an extended rain trough to help protect the wearer while within wet environments. These v-gard caps have also been fully third-party tested and certified by SEI. Flush rear lug attachments eliminate pressure points and three levels of nape strap adjustment give for a fully customized fit. With a collection of 100+ accessories, ranging from sun shades and shields to liners and lamps, your helmet will always be fit for whatever task is at hand.

Meets professional standards: v-gard 500 protective hats meet or exceed all applicable requirements for a type I top impact helmet as outlined in ANSI/ISEA Z89. 1-2014 vented class c and CSA Z94. 1-2015 vented - Class C. Hat features cooling vents for improved air circulation and comfort. Fas-trac iii suspension: designed based on opinions and input from hundreds of customers, our top-end Fas-Trac III suspension functions as an improved ratchet suspension. Also features a Glaregard surface underbrim to help reduce reflective glare.
BrandMSA #ad
ManufacturerMSA Safety #ad
Height6.25 Inches
Length11.4 Inches
Weight0.88 Pounds
Width12.95 Inches
Part Number10167911
Model10167911

7. MSA

#ad

MSA Skullgard Full Brim Hard Hat with STAZ ON Suspension, Natural Tan

#ad
MSA #ad - Full brim for full coverage protection. Meets ansi z89. 1 2014 class g ratings with Staz On Pin Lock Suspension. Fiberglass material protects your head from high heat environments. Offers the finest combination of safety, personal comfort and value in head protection. You'll be supporting your country by buying USA made products.
BrandMSA #ad
ManufacturerMSA #ad

8. MSA

#ad

Standard Size in Oilfield Camo, MSA 10204783 Hydro Dip V-Gard Full-Brim Hard Hat With Fas-Trac III Ratchet Suspension | Polyethylene Shell, Self Adjusting Crown Straps

#ad
MSA #ad - For use in general industry and manufacturing markets, construction, or oil, or those featuring electric/utilities, gas and petrochemical work. Ensure continued wear with drastically improved comfort and a graspable ratchet. These v-gard caps have also been fully third-party tested and certified by SEI.

Meets professional standards: v-gard protective caps meet or exceed all applicable requirements for a Type I top impact helmet as outlined in ANSI/ISEA Z89. 1-2014 class e and CSA Z94. 1-2015 class E. The hydro dip finish provides a new twist on style, MSA brings to you it high-quality, without sacrificing safety or performance. Choose from one of eight different looks! Hydro dipped hat: a world leader in head protection, widely-used V-Gard Hat with enhanced design and style. Slotted for accessory use: this high-quality msa v-gard helmet comes slotted for use with a variety of MSA accessories.

High quality protection: v-gard full-brim hats are made from high-density polyethylene with a UV inhibitor for superior top impact protection. Flush rear lug attachments eliminate pressure points and three levels of nape strap adjustment give for a fully customized fit. Ratchet comfort pad is contoured to the back of the head, improving airflow and preventing hair-pulling. With a collection of 100+ accessories, ranging from sun shades and shields to liners and lamps, your helmet will always be fit for whatever task is at hand.
BrandMSA #ad
ManufacturerMSA Safety #ad
Height6.02 Inches
Length12.52 Inches
Weight0.95 Pounds
Width10.51 Inches
Part Number10204783
Model10204783

9. PAULSON SAFETY

#ad

Paulson Hard Hat Sun Shield Fits Msa V Guard Hard Hat Full Brim A-S4-M

#ad
PAULSON SAFETY #ad - Visors are not universal fit, they are made for specific styles of hard hats. Be sure to buy the correct visor for your hard hat model/style.
BrandPAULSON SAFETY #ad
ManufacturerPAULSON SAFETY #ad
Part NumberA-S4-M

10. MSA

#ad

Large Size in Natural Tan, MSA 475405 Large Skullgard Cap Style Safety Hard Hat with Fas-Trac III Ratchet Suspension | Non-slotted Cap, Made of Phenolic Resin, Radiant Heat Loads up to 350F

#ad
MSA #ad - Meets professional standards: skullgard caps meet all applicable requirements for a type i top impact helmet as outlined in ansi/isea z89. 1-2014 class G. These skullgard helmets have been tested to radiant heat loads producing temperatures up to, low temperature LT, higher temperature HT, but not exceeding 350°F.

Multi-purpose cap strength: crafted with a phenolic shell and handmade for durability, this helmet is usable in a variety of industries. With custom logo options and any of 27+ different reflective and retro-reflective stripes, MSA gives the ultimate experience in hardhat customization. Date codes are molded into the underside of the shell’s brim with the year and month in which that specific shell was manufactured. Variety of sizes & colors: comes available in a large variety of colors and sizes with custom imprinting and striping options. Ratchet comfort pad is contoured to the back of the head, improving airflow and preventing hair-pulling.

This date does not indicate a helmet’s service life; the service life begins when it is placed into service. See attached FAQ sheet. Use skullgard helmets in steel mills, open-pit mining, construction, oil/gas/petrochemical refineries, rubber manufacturing, welding, toughness and quality, and steam tunnels. A smooth crown allows for the easiest use of all MSA welding equipment. Flush rear lug attachments eliminate pressure points and three levels of nape strap adjustment give for a fully customized fit.
BrandMSA #ad
ManufacturerMSA #ad
Height5.25 Inches
Length11 Inches
Weight0.4 Pounds
Width8.5 Inches
Part Number475405
Model475405