As an Amazon Associate I earn from qualifying purchases.
Cabinet hardware jig: the Kreg Cabinet Hardware Jig takes the guesswork out of installing cabinet knobs and pulls`. Drawer slide jig: the Drawer Slide Jig takes the guesswork out of installing drawer slides.








Dual position and adjustable 1-inch and 2-inch fence with standard hole spacing of 32 mm and a standard hole size of 1/4-Inch also sold separately 5 mm hole size. This jig from kreg offers hardened steel drill guides to make sure you're on the mark every time.

1. KREG
#ad
Drawer Slide Jig with Cabinet Hardware Jig with Concealed Hinge Jig and Two 2" Face Clamps, Kreg Tool Company
#adKREG #ad - Hardware installation kit: three easy-to-use jigs plus two bonus Clamps in one specially-priced kit. Concealed hinge jig: the Concealed Hinge Jig takes the guesswork out of installing cabinet doors using concealed hinges.Cabinet hardware jig: the Kreg Cabinet Hardware Jig takes the guesswork out of installing cabinet knobs and pulls`. Drawer slide jig: the Drawer Slide Jig takes the guesswork out of installing drawer slides.
More information #ad
With this hardware installation kit you can install knobs and pulls, and drawer slides with accurate, concealed hinges, repeatable results. Classic 2-inch face clamp: classic 2-inch face Clamps are designed for creating perfectly flush Kreg Joints, and they work great for lots of other shop and project tasks that require solid clamping without marring.Brand | KREG #ad |
Manufacturer | Kreg #ad |
Height | 9.1 Inches |
Length | 9.1 Inches |
Weight | 1 Pounds |
Width | 9.1 Inches |
Part Number | KHI-PROMO-19 |
More information #ad
2. Kreg Tool
#ad
Kreg KHC-Premium Face Clamp
#adKreg Tool #ad - Unique clamp designed specifically for pocket-screw joinery. The large face of the clamp keeps the joint perfectly flush. Used primarily for securing individual joints while pocket-screws are being driven. 3" reach 76mm; clamps materials up to 23/4" Thick 70mm.More information #ad
Brand | Kreg Tool #ad |
Manufacturer | Kreg #ad |
Height | 8.25 Inches |
Length | 9 Inches |
Weight | 3 Pounds |
Width | 32.5 Inches |
Part Number | KHC-PREMIUM |
Model | KHC-PREMIUM |
More information #ad
3. KREG
#ad
Kreg Pocket-Hole Jig 720
#adKREG #ad - Includes 160 screws to build included project plan. Dust collection to keep workspace clean. Gripmaxx anti-slip holds material in place for worry-free clamping. Build pocket-hole projects faster than ever! Multi-featured jig for creating pocket-hole joints in materials from ½" to 1-½" thick.More information #ad
On-board storage keeps Kreg accessories close at hand. Durable construction with steel-reinforced spine and lifetime drill guide warranty. Dual-action clamping with Automaxx automatically clamps and adjusts to the proper material thickness.Brand | KREG #ad |
Manufacturer | Kreg #ad |
Height | 5.2 Inches |
Length | 13.7 Inches |
Width | 9.2 Inches |
Part Number | KPHJ720 |
Model | KPHJ720 |
Warranty | 1 year limited |
More information #ad
4. KREG
#ad
Kreg KMA2900 Multi-Mark Multi-Purpose Marking and Measuring Tool
#adKREG #ad - The multi-mark features three different scale configurations, a built-in level, a handy 3/16” reveal gauge. Wide variety of measuring and marking functions. Item is manufactured in United States.More information #ad
Perfect for general layout. Cumulative scale for transferring measurements. From the manufacturer: The Kreg Multi-Mark is an incredibly handy multi-purpose marking. 3/16-inch offset for door trim. 3 unique scale positions.Brand | KREG #ad |
Manufacturer | Kreg #ad |
Height | 0 Inches |
Length | 0 Inches |
Weight | 0.25 Pounds |
Width | 0 Inches |
Part Number | KMA2900 |
Model | KMA2900 |
More information #ad
5. Kreg
#ad
Kreg KMA2685 Rip-Cut Circular Saw Guide , Blue
#adKreg #ad - Eliminate need for marking, measuring, and layout lines. Cut multiple pieces to the same size With just one setup. Make rip cuts and crosscuts up to 24" Wide.More information #ad
Use the oversize edge guide for precise control throughout the cut. Take your saw to the material instead of having to take your material to the saw.Brand | Kreg #ad |
Manufacturer | Kreg #ad |
Height | 2.5 Inches |
Length | 30.88 Inches |
Weight | 2.45 Pounds |
Width | 8.75 Inches |
Part Number | KMA2685 |
Model | KMA2685 |
Warranty | 90 day warranty |
More information #ad
6. KREG
#ad
Kreg KHCCC 90° Corner Clamp
#adKREG #ad - Cast aluminum “V” and Wedge Clamp pads. 1" maximum capacity. Padded, ergonomic handles. Works on 90° corners and “T” joints. Easy-to-regulate clamping pressure with thumbwheel. Cutout allows driving a pocket-hole screw without removing Clamp. Automaxx auto-adjust technology.More information #ad
Brand | KREG #ad |
Manufacturer | Kreg #ad |
Height | 4.14 Inches |
Length | 11.5 Inches |
Weight | 0.49 Pounds |
Width | 5.25 Inches |
Part Number | KHCCC |
Model | KHCCC |
More information #ad
7. KREG
#ad
Kreg DDS 3-Inch No.2 Square Driver Bit and 6-Inch No.2 Square Driver Bit for Kreg Pocket Hole Systems
#adKREG #ad - Deep 2 driver recess resists cam-out. Drivers come in standard or hardened tip version. 6-inch length is easy to use. 3-inch length is great in tight spots. 3-inch and 6-Inch lengths offered.More information #ad
Brand | KREG #ad |
Manufacturer | Kreg #ad |
Height | 9 Inches |
Length | 1 Inches |
Weight | 0.1 Pounds |
Width | 2 Inches |
Part Number | 320637 |
Model | DDS |
More information #ad
8. KREG
#ad
KREG P-PIN Solid-Wood Pocket-Hole Plugs, Pine
#adKREG #ad - Versatile pine plugs for pockets. Made from quality doweling for solid joining. 50-count bag. Cut to match the pocket's angle for minimal sanding.More information #ad
Brand | KREG #ad |
Manufacturer | Kreg #ad |
Height | 1.7 Inches |
Length | 5.5 Inches |
Weight | 0.11 Pounds |
Width | 5.2 Inches |
Part Number | P-PIN |
Model | P-PIN |
Warranty | As Labeled |
More information #ad
9. KREG
#ad
KREG KMA3200 Shelf Pin Drilling Jig 8 in.
#adKREG #ad - Connect multiple jigs together with the jig extender. Includes shelf-pin jig, locating pin, instruction manual, jig extender, Allen wrench, 1/4-Inch drill bit, depth collar, and four 1/4-Inch shelf pins.Dual position and adjustable 1-inch and 2-inch fence with standard hole spacing of 32 mm and a standard hole size of 1/4-Inch also sold separately 5 mm hole size. This jig from kreg offers hardened steel drill guides to make sure you're on the mark every time.
More information #ad
A locating pin helps you quickly reference the same mark every time. Locating pin lets you quickly reference last hole drilled. Hardened steel drill guides ensure precise drilling. The perfect drill guide for shelving, whether you're building from scratch or adding to existing furniture.Brand | KREG #ad |
Manufacturer | Kreg #ad |
Height | 8 Inches |
Length | 4.25 Inches |
Weight | 0.68 Pounds |
Width | 2 Inches |
Part Number | KMA3200 |
Model | KMA3200 |
Warranty | Steel Drill Guide has a lifetime warranty |
More information #ad
10. Kreg
#ad
Kreg KWS1000 Mobile Project Center
#adKreg #ad - Hole pattern on tables accept bench dogs and other accessories. Heavy-gauge steel legs provide a solid foundation. Built-in storage trays hold hardware and parts.More information #ad
Auto-adjust bench clamp and 4 Bench dogs included. Multiple work modes provide maximum versatility. Folds down in seconds for work on the go, and for easy storage.Brand | Kreg #ad |
Manufacturer | Kreg Tool Company #ad |
Height | 31.5 Inches |
Length | 31.5 Inches |
Weight | 40 Pounds |
Width | 27.75 Inches |
Part Number | KWS1000 |
Model | KWS1000 |
More information #ad