Top 10 Guide Rail for Circular Saw – Circular Saw Blades

As an Amazon Associate I earn from qualifying purchases.

1. Kreg


Blue, Kreg KMA2685 Rip-Cut Circular Saw Guide

Kreg #ad - Use the oversize edge guide for precise control throughout the cut. Cut multiple pieces to the same size With just one setup. Make rip cuts and crosscuts up to 24" Wide.
BrandKreg #ad
ManufacturerKreg #ad
Height2.5 Inches
Length30.88 Inches
Weight2.45 Pounds
Width8.75 Inches
Part NumberKMA2685
Warranty90 day warranty



Circular Saw Track Circular Saw Track

KREG #ad - Hold track in place without clamps thanks to anti-slip guide strips. Rip, mdf, and make angled cuts up to 50" Long in plywood, crosscut, and panels. Simply align the guide Track with your marks to make accurate cuts. Prevent splintering with anti-chip strips that support material during the cut. Begin cuts easily with a starting block that the supports saw and allows normal blade guard operation,.
BrandKREG #ad
ManufacturerKreg #ad
Height2.5 Inches
Length27.5 Inches
Weight5.05 Pounds
Width8.75 Inches
Part NumberKMA2700
Warranty90 day warranty

3. Bora


Easy to Use, Great for Cross-Cutting Plywood Sheets and Routing Dados, BORA 50” NGX Clamp Edge, 544050, Straight Cut Guide for Circular Saws

Bora #ad - For big projects, not just Bora Tools. Use with any circular saw: this guide is compatible with any brand of circular saw, and jigsaws. Extreme durability: made of heavy-gauge, extruded aluminum, it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use.

Clamps firmly: this straight edge guide has a wide rubberized clamp face to ensure a tight non-slip grip that won’t leave indentations and is easily adjustable to meet the length of your project. Circular saw guide for large sheets: the bora Clamp Edge is an ideal accessory for accurately cutting wide boards and pieces of plywood that are too big for a table saw. Use it with circular saws, routers, easily increase the length up to 100 in. By adding the bora NGX 50-inch aluminum extension.
BrandBora #ad
ManufacturerBora #ad
Height2 Inches
Length58 Inches
Width3 Inches
Part Number544050
Warranty1 year

4. Makita


Makita 194368-5 55" Guide Rail

Makita #ad - 55" guide rail for use with makita plunge Saw models XPS01, XPS02, and SP6000J. Alternate use with select routers and circular saws, must use with router guide rail adapter 194579-2 and saw guide rail adapter 196953-0 . Ideal for ripping sheet material. Interacts with the saw base and engineered to deliver smooth, dead-on straight or bevel cutting.
BrandMakita #ad
ManufacturerMakita #ad
Height0.43 Inches
Length55.11 Inches
Weight6.61 Pounds
Width7.28 Inches
Part Number194368-5

5. Bora


530416, Bora QuickCut Circular Saw Guide with Rail & Angle Assist; All-In-One Woodworking Tool

Bora #ad - It's 16 inches long, with a 14-inch 35. 5cm guide rail for making long, straight cuts. Cut wood or soft metals with unrivaled precision at four preset angles: 22. 5°, 60°, and 90°. Easy grip: the large, curved handle provides extra comfort and precision.

Measure perfectly flush angles for framing and crown molding, measure, without doing the math. Mark, and cut with ease: save yourself the calculations of a typical tri-square with bora’s advanced cut guide. The multiple angles on this circular saw accessory eliminate the need for a miter saw or more complex jigs. With the quickcut, you can get a firm hold on your circular saw without your edge guide slipping.

The ruler also features imperial and metric measurements. Bora quality: bora tool is a leader in innovative power tool accessories that make your jobs and projects run smoothly. One tool, 45°, countless uses: the bora quickcut does the work of multiple tools, all with one useful saw guide. Durable: bora’s quickcut saw guide is made with strong aluminum extrusion and conveniently placed ruler marks.
BrandBora #ad
ManufacturerBora Portamate #ad
Height1.5 Inches
Length19.25 Inches
Weight0.9 Pounds
Width6.5 Inches
Part Number530416



Kreg Straight Edge Guide XL-8 Ft

KREG #ad - Cutline indicators help position cuts perfectly. Built-in clamping with GripMaxx secures rail to material. Crosscut and rip cut material up to 8 feet 244cm. Works with left- and right-blade circular saws, as well as some jigsaws and trim routers. Aluminum guide rail leads cuts precisely along a straight line.
BrandKREG #ad
ManufacturerKreg #ad
Height9.1 Inches
Length9.1 Inches
Width9.1 Inches
Part NumberKMA4700-E
Warranty1 year limited

7. Bora


Bora 100” WTX Ruled Clamp Edge Saw Guide for Woodworking, Guide for Circular Saws, 545100, 100 Inch Cutting Length, Contractors, Carpenters and DIY

Bora #ad - With the wtx clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts. Locked in: the adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood.

It’s long 100-inch length allows you to saw with precision and skill. Make measuring easy: the wtx clamp edge has a ruled edge with both metric and imperial measurements to make your job of getting perfect cuts quick and easy. Additional accessories: the bora wtx saw guide System has additional accessories including the Saw Plate, Track Clamps for cutting any angle, and the Router Guide. Get it straight every time: this rigid aluminum guide rail is a must-have accessory for keeping your cutting on track.

The locking handle grabs surfaces for a secure edge that won't budge while you cut. Suited for your needs: the modular design allows for additional extensions to be added to expand your cutting length up to 100 inches. 100 inches of cutting: with your purchase you will receive a 50" WTX Clamp Edge and WTX 50" Extension, connect the pieces together for 100 inches of straight cuts.
BrandBora #ad
ManufacturerAffinity Tool Works #ad
Height1.38 Inches
Length62.75 Inches
Weight3 Pounds
Width3 Inches
Part Number545100

8. Milescraft Inc.


Milescraft 14000713 Saw Guide for Circular and Jig Saws

Milescraft Inc. #ad - 4 metal bars and special clips accommodate most circular and jig saws. Incremental trim feature makes tool-free adjustments by 1/16 inch. Extends saw blade up to 9. 5″ from edge of workpiece with Jigsaws. Cuts circles from 4″ to 19″ in diameter. Extends saw blade up to 6″ from edge of workpiece with Circular Saws.
BrandMilescraft Inc. #ad
ManufacturerMilescraft Inc. #ad
Height16.3 Inches
Length1.3 Inches
Weight1 Pounds
Width7.3 Inches
Part Number1400
WarrantyThree-Year Limited Warranty

9. WEN


WEN CT9502 100-Inch Track Saw Track Guide Rail and Adapters

WEN #ad - Includes two 50-inch track saw tracks and a set of adapters. Make straight and precise cuts over 8 feet long. Universal design compatible with Evolution, Makita and Festool track saws. Included adapter set features four set screws for maximum stability. Designed to fit the weN CT1065 Plunge Track Saw.
BrandWEN #ad
ManufacturerWEN #ad
Part NumberCT9502

10. Makita


Makita 199140-0 39" Guide Rail

Makita #ad - For use with makita plunge saw models XPS01, XPS02, and SP6000J. Compatible with select Makita circular saws, Jig saws and routers when used in conjunction with required guide rail adapter. Plunge saw base connects directly to guide rail to deliver smooth, dead-on straight or bevel cuts. Optional guide rail connector kit p-45777 and guide rail Clamps 194385-5 available. Ideal for ripping sheet material.
BrandMakita #ad
ManufacturerMakita #ad
Height1.75 Inches
Length39.37 Inches
Weight2.2 Pounds
Width42.5 Inches
Part Number199140-0