Top 10 Figure 8 Fastener with Screws – Wood Screws

As an Amazon Associate I earn from qualifying purchases.

1. NIDAYE

#ad

Solid Steel, 12 Gauge, 30 Pack Figure 8 Steel Desk Top Fastener Clip with Screws, Heavy Duty Figure-Eight Fasteners Clips Attaching a Table

#adNIDAYE #ad - Reduce wood splitting: Securely fastens wooden table surface to its rails. Very simple in design: these flat fasteners are shaped like two washers that got crushed in a press somewhere, ending up with a figure-eight shape. Easy to install: drill the hole, run a screw snug but not over-tight the fastener in both apron and the wooden top surface, providing a pivot point to accommodate seasonal wood movement. If you have any problem, please don't hesitate to contact us, we'll reply within 24 hours. Made from high quality Steel: Die casting with zinc finished to prevent rusting and corrosion.

Brand	NIDAYE #ad
Part Number	AX00077DX-01
Model	AX00077DX-01

2. Podoy

#ad

Heavy Duty 12 Gauge Steel, Desk Top Fasteners Clip Pack of 20, Table Top Connector, Desktop Fasteners Figure 8 with Screws

#adPodoy #ad - Money back guarantee: If you're not completely satisfied, you can ask for a replacement or refund. Installation:just use a forstner bit or router to make a cut out to screw this down to your frame. Model type: heavy duty desktop fasteners figure 8- pack of 20, with 40 screws. Each fastener measures 1-3/16" x 5/8" x 12"gauge. Widely use: these fasteners can be installed on the inside or outside of hardware / table tops / desk tops / cabinet fronts. High quanlity:12-gauge carbon steel almost 1/8" thick - zinc coated to prevent rusting and corrosion. It can be used for a long time.

Brand	Podoy #ad
Manufacturer	Podoy #ad

3. NIDAYE

#ad

12 Gauge, Solid Steel, 20 Pack Figure 8 Steel Desk Top Fastener Clip, Heavy Duty Figure-Eight Fasteners Clips Attaching a Table

#adNIDAYE #ad - Very simple in design: these flat fasteners are shaped like two washers that got crushed in a press somewhere, ending up with a figure-eight shape. Reduce wood splitting: Securely fastens wooden table surface to its rails. Easy to install: drill the hole, run a screw snug but not over-tight the fastener in both apron and the wooden top surface, providing a pivot point to accommodate seasonal wood movement. Made from high quality Steel: Die casting with zinc finished to prevent rusting and corrosion. If you have any problem, please don't hesitate to contact us, we'll reply within 24 hours.

Brand	NIDAYE #ad
Manufacturer	NIDAYE #ad
Weight	0.28 Pounds

4. Podoy

#ad

Heavy Duty 12 Gauge Steel, Figure 8 Table Top Fasteners with Screws, Desk Top Fasteners Clip Pack of 30, Table Top Connector

#adPodoy #ad - Model type: heavy duty desktop fasteners figure 8- pack of 30, with 60 screws. Each fastener measures 1-3/16" x 5/8" x 12"gauge. Money back guarantee: If you're not completely satisfied, you can ask for a replacement or refund. Widely use: these fasteners can be installed on the inside or outside of hardware / table tops / desk tops / cabinet fronts. High quanlity:12-gauge carbon steel almost 1/8" thick - zinc coated to prevent rusting and corrosion. It can be used for a long time. Installation:just use a forstner bit or router to make a cut out to screw this down to your frame.

Brand	Podoy #ad
Manufacturer	Podoy #ad
Part Number	Podoy

5. Aiwaiufu

#ad

Heavy Duty and Galvanized Finish 12 Gauge Solid Steel Table Top Connectors/Fasteners Clips for Securing Table/Desktops/Cabinet, Set of 20 Packs, Figure 8 Desktop Fastener Clip with Screws

#adAiwaiufu #ad - Ideal tool: fasteners for securing table tops, cabinet fronts, desktops, drawer fronts, etc. Package include: 1 pack desk top fastener clip includes 20 clips and 40 screws.

Simple installation: drill the holes and use our matching mounting screws to connect the fasteners to the desktop. Better protection：reduce wood splitting, securely fastens wooden table surface to its rails, and increase the service life of the table. Each fastener measures 1-5/16" x 3/4" x 12"gauge. Heavy duty & anti-rust: Solid steel made, zinc coated finish for stronger durability and anti-corrosion. Be careful not to over tighten.

Brand	Aiwaiufu #ad
Manufacturer	Aiwaiufu #ad
Part Number	8ztp

6. Performore

#ad

Solid Steel with 80 Nickel Screws, Heavy Duty Figure-Eight Fasteners Table Top Connector or Desk Top Fastener Clip, 40 Pack of Figure 8 Shaped Steel Desk Top Fastener Clips

#adPerformore #ad - Save more money — buy in bulk and save more! We offer these 40 flat fasteners in a pack at a very low price. Back screws are coated for a long-lasting performance. Nickel screws are included. By recessing one “washer” into the top of your vertical piece, you use the other “washer” to attach to the horizontal.

It is made with the high quality of die casting steel coated with zinc for rusting and corrosion resistance. Typically used to connect an apron to a surface, these fasteners have myriad uses. Premium quality — these flat fasteners are shaped like two washers that got crushed in a press somewhere, ending up with a figure-eight shape. Drill the hole, run a screw snug but not over-tight the fastener in both apron and the wooden top surface, providing a pivot point to accommodate seasonal wood movement.

Die casting with zinc finished to prevent rusting and corrosion. Convenient — securely fastens wooden table surface to its rails. Durable and long-lasting — made from high quality steel. Easy-to-install — the figure 8 desktop fastener is an easy to install tool for securing table or desktops.

Brand	Performore #ad
Manufacturer	Performore #ad
Part Number	OL8TTFAST

7. Podoy

#ad

Desk Top Hold Down Fasteners Clip by Podoy, Table Top Connector, Heavy Duty 12 Gauge Steel, Pack of 30 Desktop Fasteners Figure 8

#adPodoy #ad - These fasteners can be installed on the inside or outside of the apron. Dimension: each fastener measures 1-3/16" x 5/8" x 12"gauge almost 1/8" thick. Countersunk holes on opposite sides to keep screw heads flush, designed for #6 flat head screws. Easy to install and inexpensive: the shape of the figure 8 fastener allows them to pivot as the tabletop expands and contracts. 12-gauge carbon steel almost 1/8" thick - zinc coated to prevent rusting and corrosion. Widely use: hardware, cabinet fronts, desk tops, Table tops, drawer fronts etc.

Brand	Podoy #ad
Manufacturer	Podoy #ad
Part Number	podoy flat twin circle clip 30

8. Elegent Upholstery

#ad

Heavy Duty Figure 8 Table Desk Top Fastener Hardware Bracket with Screws 11 Gauge, 24 Pack

#adElegent Upholstery #ad - Set of 24 Brackets. Bracket dimensions: 1-3/16" x 11/16". Includes 24 3/4" #6 Philips Wood Screws. 11 gauge steel 1/8" Thick.

Brand	Elegent Upholstery #ad
Manufacturer	Elegent Upholstery #ad

9. Ketofa

#ad

Figure 8 Steel Desk Top Fastener Clip, Desk Top Hold Down Fasteners ClipPack of 40, Heavy Duty 12 Gauge Steel, Table Top Connector

#adKetofa #ad - To prevent rusting and corrosion. Dimension: each fastener measures 1-3/16" x 5/8" x 12"gauge, designed for #6 flat head screws.

Widely use: hardware, cabinet fronts, desk tops, table tops, drawer fronts etc. Function: reduce wood Splitting. Coated with zinc for rusting and corrosion resistance. Easy to install: this is a super simple system to connect table tops to the table base that allow the top to move freely without compromising the integrity of the table base. Durable: 12-gauge carbon steel almost 1/8" thick, approx 1/8" thick. Connects table tops or desk tops to their apron easily.

Brand	Ketofa #ad
Manufacturer	Ketofa #ad
Part Number	Fasteners Figure 8

10. HIGHPOINT

#ad

10-Piece, Highpoint Desk Top Figure 8 Fastener

#adHIGHPOINT #ad - Size is 1-1/4” long x 5/8” wide. Helps reduce the effects of natural wood movement. 10 pieces, screws included. 14-gauge steel highpoINT Figure 8 Fasteners.

Brand	HIGHPOINT #ad
Manufacturer	Woodcraft Supply #ad
Height	0.6 Inches
Length	5.85 Inches
Weight	0.19 Pounds
Width	2.85 Inches
Part Number	159303