Top 10 Dust Collection Fittings 2 1/2 Inch – Vacuum & Dust Collector Hoses

As an Amazon Associate I earn from qualifying purchases.

1. Fulton

#ad

2 1/2" x 20' Clear PVC Dust Collection Hose For Use with Dust Collectors with 2-1/2" Ports. Ideal for Shop Vacuums

#ad
Fulton #ad - Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses. It must also perform under the constant use and abuse of an everyday workshop environment. Pvc hose depending on diameter can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go.

The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose. This pvc hose checks all of those boxes and more! Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. While pvc hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20° F to 165° F which is ideal for indoor use like in a woodworking or workshop environment.

When setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process and trying to figure out what type of line, flexible and sturdy enough, piping or hose to use can be challenging. The pvc hose flexes enough to weave in and out of shop machinery or table legs without kinking. Typically, pvc hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This pvc hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it.
BrandFulton #ad
ManufacturerPeachtree Woodworking Supply Inc #ad
Height6 Inches
Length14 Inches
Weight5 Pounds
Width14 Inches
Part Number368
Model368

2. POWERTEC

#ad

POWERTEC 70179 Y-Fitting, 2-1/2", Black

#ad
POWERTEC #ad - And 2-7/32" I. D. Provides a multitude of applications. Three 2-1/2-inch nominal ends measure 2-31/64”" O. Tough, durable ABS plastic material. Simple and quick to install. D. Provides airtight friction fit.
BrandPOWERTEC #ad
ManufacturerPOWERTEC #ad
Height5.5 Inches
Length6.5 Inches
Width2.5 Inches
Part Number70179
Model70179

3. POWERTEC

#ad

POWERTEC 70133 2-1/2-Inch Blast Gate for Dust Collector/Vacuum Fittings

#ad
POWERTEC #ad - Easy sliding gate action saves you effort and time. And 2-19/64-inch I. D. 2-1/2-inch outlet diameter. Tough, durable ABS material. 2-1/2-inch nominal end measure 2-31/64-inch O. D. Maximizes the efficiency of dust collection system by directing the air flow from one machine to another.
BrandPOWERTEC #ad
ManufacturerSouthern Technology LLC #ad
Height3 Inches
Length6 Inches
Weight0.35 Pounds
Width4 Inches
Part Number70133
Model70133

4. POWERTEC

#ad

POWERTEC 70124 Universal Dust Port, 2 1/2"

#ad
POWERTEC #ad - Opening 2-1/2-inch nominal end measures 2-15/32-Inch tapered O. D. Made of superior, durable ABC plastic material. And 19/64-inch I. D. Flange end measures 3-5/8-Inch by 4-Inch. Designed to attach easily and securely to machines for connecting to dust collection systems.
BrandPOWERTEC #ad
ManufacturerSouthern Technology LLC #ad
Height3.5 Inches
Length4.2 Inches
Weight0.11 Pounds
Width4.09 Inches
Part Number70124
Model70124

5. POWERTEC

#ad

POWERTEC 70148 Dust Control Flex Cuff with Hose Clamps, 2-1/2-Inch

#ad
POWERTEC #ad - Adapters or hoses. Dimensions: o. D 2-57/64” and i. D 2-1/2” | connects to 2-1/2 inch nominal outer diameter adapter or dust hose. Designed to airtight connection of two fittings or hoses without using duct tapes.

Includes: 1 flexible hose Cuff Coupler with 2 Dust Hose Clamps. Easy to use: these reusable flex cuffs are easily installed and can be removed without the need for assorted screws or duct tape. Both ends measures 2-57/64-inch o. D. A pair of hose clamps included. Connect to 2-1/2-inch O. D. Function: provides a perfectly sealed, airtight connection between a pair of 2-1/2 inch OD dust collection equipment ports, hoses or fittings.

Premium build: made with a durable rubber construction to withstand long-term wear and tear, and possesses a flexible design that seamlessly conforms to slight diameter differences in fittings. Rubber construction provide flexibility to bridge slight diameter differences. And 2-35/64-inch I. D.
BrandPOWERTEC #ad
ManufacturerSouthern Technology LLC #ad
Height2.4 Inches
Length2.75 Inches
Weight0.02 Pounds
Width2.75 Inches
Part Number70148
Model70148

6. POWERTEC

#ad

POWERTEC 70200 2-1/2" Three-Machine Dust Collection Kit

#ad
POWERTEC #ad - All fittings are nominal 2-1/2 inch od actual size – 2-31/64 inch od and 2-7/32 inch id and are designed to work with 2-1/2” ID dust collection hoses like Powertec 70129 or adapters. Pro tip: it is recommended to ground your woodworking dust collection system assembly to eliminate static electricity when employing included fittings and gates.

Easy to use: all components in this kit allow for a quick and easy assembly, couplers, and work well with other 2-1/2 inch ID dust collection accessories, fittings and piping options for full customization. Applications: an all-in-one set of dust collection fittings and attachments designed to help you create your very own 3-machine dust collection network for your work shop.

Includes: 2 45-degree elbow connectors, 2 y-fittings, 3 Dust Collector Blast Gates, and 20 2-1/2” Key Hose Clamps. Premium: manufactured with high quality material; the fittings and gates are made with ABS plastic for long-term durability, and the hose clamps are constructed using stainless steel. They will not work directly with PVC pipe.
BrandPOWERTEC #ad
ManufacturerPOWERTEC #ad
Height7 Inches
Length11 Inches
Width12 Inches
Part NumberFBA_70200
Model70200

7. POWERTEC

#ad

POWERTEC 70138 2-1/2-Inch to 1-1/2-Inch Reducer

#ad
POWERTEC #ad - 1-1/2-inch nominal end measures 1-15/32-inch O. D. Reduces from a 2-1/2-inch to a 1-1/2-Inch hose greatly increasing the air velocity of the machine. Before ordering, verify that the listed dimensions fit your shop vacuum and application.

1-1/2-inch nominal end measures 1-15/32-Inch O. D. Connect a 2-1/2-inch hose or accessory to a 1-1/2-Inch hose. And 1-1/4-inch I. Tough, durable ABS plastic material. Adaptable to a variety of shop vacuum cleaners but will not work in all applications. 2-1/2-inch nominal end measures 2-15/32-Inch O. D. And 2-1/4-inch I. D. D. And 1-1/4-inch I. D. Outlet diameter: 2-1/2-Inch and 1-1/2-Inch. Tough, durable ABS plastic material. Adaptable to shop-vac, Sears and a variety of other wet/dry vacuum cleaners.
BrandPOWERTEC #ad
ManufacturerSouthern Technology LLC #ad
Height3 Inches
Length2 Inches
Width2 Inches
Part Number70138
Model70138

8. POWERTEC

#ad

POWERTEC 70204 Dust Collection Rectangular Nozzle for 2-1/2” Dust Collection Hose Fittings

#ad
POWERTEC #ad - D. Dimensions: hood measures 6” x 3-1/2” | height 3-3/16” | nominal end measures 2-31/64” O. Quality: this dust hose nozzle was manufactured with premium grade ABS plastic, providing high impact and heat resistance with exceptional tensile strength for long-term durability.

Function: a uniquely shaped add-on dust collection accessory that attaches to a 2-1/2” dust collection hose – for sanding with your drill press, sander, or drilling machines. Application: design allows for point of use attachment - perfect solution for sanding, drilling, using a drill press and other woodworking projects. Includes: 6 in. D / 2-15/64” i. X 3-1/2 in. Rectangular dust Hood Nozzle – Black.
BrandPOWERTEC #ad
ManufacturerPOWERTEC #ad
Height3.25 Inches
Length3.5 Inches
Width6 Inches
Part Number70204
Model70204

9. POWERTEC

#ad

POWERTEC 70276 4-Inch to 2-1/2-Inch Dust Collection Splitter Fitting

#ad
POWERTEC #ad - Port dimensions: 4” nominal od – 3. 902” or 3-29/32”, id 3. 733” or 3-47/64” 2-1/2” nominal od – 2. 5” or 2-1/2”, id – 2. 32 “or 2-21/64”. Includes: 1 4” to 2-1/2” Dust Collection Hose Splitter.

Applications: these dust collection fittings are perfect for optimizing the effectiveness of your dust collector system when paired with standard shop vac or other 2. 5” hoses. Function: allows you to connect a 4” id dust hose with two 2-1/2” ID dust hoses, while providing minimal suction loss from your assorted connections. Build: this y-adapter splitter is made with impact resistant ABS plastic for long-term durability and a heavy duty profile commonly needed for workshop and woodworking set-ups.
BrandPOWERTEC #ad
ManufacturerPOWERTEC #ad
Height4.3 Inches
Length9.9 Inches
Width7.2 Inches
Part Number70276
Model70276

10. POWERTEC

#ad

POWERTEC 70141 2-1/2-Inch to 2-1/4-Inch Reducer

#ad
POWERTEC #ad - 2-1/2-inch nominal tapered od end measures from 2-29/64” 2. 448” to 2-29/64” 2. 480” with 2-7/32-Inch I. Please closely check the listed dimensions to verify that they will work for your application. Please note: the nominal 2-1/4” od is tapered on the low end of the tolerance and works best with undersized ports. 2-1/4-inch nominal tapered od end measures from 2-13/64” 2. 210 to 2-7/32” 2. 225 with a 2-Inch I. D. Tough, durable ABS plastic material. D. Connect 2-1/2” id flexible dust collection hose to 2-1/4” ID ports or adapters.
BrandPOWERTEC #ad
ManufacturerSouthern Technology LLC #ad
Height3 Inches
Length2 Inches
Weight0.3 Pounds
Width2 Inches
Part Number70141
Model70141