As an Amazon Associate I earn from qualifying purchases.
Tinpec #ad - Project helpera clear storage case comes with the carbide burr set for easier storage and access. Cutting burr demensions: length:45-50mm, diameter 1/4'', Shank Length 35mm, Shank Diameter 1/8''.
Die grinder cutting burrs: carbide burrs casted from tungsten steel with amazing HRA>85. 1/8” shank: with widely adopted 1/8” shank, tinpec carbide burrs are compatible with most handheld electric or air powered tools, also in machine tools.
A smart choice for your DIY, engraving, polishing, woodworking and carving projects. Long service life: thanks to our hardened Tungsten Steel and superb tech, Tinpec die grinder bits are 10x more lasting than high-speed steel and 200x than grinding wheel. Fast and smooth centering with the three jaw chuck.
CBTONE #ad - 20 pcs solid carbide rotary burr set, 1/8 inch3mm shank, fits Dremel and most small rotary tools. With tungsten carbide material, sharp and sturdy, processing all kinds of metal and non-metal. Rotary tool bits widely used for metalwork, wood carving, tool making, model engineering, jewelry making, welding, grinding, chamfering, deburring, casting, cylinder head porting and sculpting.
JESTUOUS #ad - Carbide burrs can be used with handheld electric or pneumatic tool drive, for Die Grinder, Dremmel Tool or Rotary Drill which can go along with 1/8" shank carbide burs. Assorted shapes include: ball, cone, rounded cylinder, flat top cylinder.
POLIWELL #ad - Premium material carbide rotary burr set made from high-quality tungsten steel sturdy and durable. Professional toolsthis is an essential carbide rotary burr toolkit for woodworking and engraving enthusiasts. The working life of these solid rotary burr is 10 times longer than high-speed steel and 200 times longer than grinding wheel.
Adaptability 1/8” shank fits most die grinders and small rotary tools with three jaw chuck for accurate centering. Tungsten carbide material also makes bits more wear-resistant and heat-resistant, preventing carbide bur from getting too hot in the process of use. Packed with plastic storage case.
Carbide die grinder bitstotal length:45-50mm; shaft diameter: 1/8 inch3mm; drill bit size: 6mm and 3mm. Used on wood, carbon steel, and marble, alloy steel, copper, glass, jade, aluminum, and other metals, iron, stainless steel, plastic, bone etc. Double & single cutthe groove lines of these 6mm head and 10pcs 3mm head carbide rotary burr's head are crossed, such as iron, can prevents chipping, plastic and aluminum.
uxcell #ad - Fits most rotary die grinders. Always ensure your burrs shank is well inserted into your collet and clamped down tightly. Single cut design: single groove rotary files are more suitable for the object density is relatively high, such as alloy steel, stainless steel, hardened steel.
Specifications: shank diameter: 3mm1/8", cutting edge diameter: 6mm. Versatile use: widely used for metalwork, chamfering, wood carving, tool making, deburring, casting, jewelry making, welding, model engineering, grinding, sculpting.
uxcell #ad - Versatile use: widely used for metalwork, tool making, jewelry making, welding, model engineering, chamfering, deburring, wood carving, casting, grinding, sculpting.
Always ensure your burrs shank is well inserted into your collet and clamped down tightly. Single cut design: single groove rotary files are more suitable for the object density is relatively high, stainless steel, such as alloy steel, hardened steel.
YAKAMOZ #ad - Usage: widely used for metalwork, grinding, chamfering, welding, milling, tool making, casting, wood carving, model engineering, cylinder head porting and sculpting.
Hardness: processing all kinds of metalincluding all sorts of hardened steel and non-metal such as marble, plastic, jade, wood, and the machining hardness can reach to HRC70.
YUFUTOL #ad - Usage | suitable for grinding and carving soft metals as aluminum, Non-ferrous metals, wood and plastic. Target | this is a essential kit for professionals & DIY carving fans, easy to grasp and use, safe and reliable. Single cut | designed for rapid stock removal with minimum chip loading, prevent iron-chip accumulate and over-heat cause cutter head damage.
uxcell #ad - Versatile use: widely used for metalwork, casting, tool making, jewelry making, wood carving, grinding, deburring, model engineering, chamfering, welding, sculpting.
Fits most rotary die grinders. Specifications: shank diameter: 3mm1/8", cutting edge diameter: 2mm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly. Tips: requirement of the carbide burrs rotating speed is: 4000-50000 rpm.
WUWTOOLS #ad - Double cut head design- our cutting burrs set suitable for dIY wooden, plastic, high stock removal, aluminum and titanium alloy. Strength at high temperatures, you can run it faster and hotter for long production runs. Package details: 20pcs double cut tungsten carbide cutting burrs set with 1/8"3mm shank and 1/8"3mm Head.
Easy to use- the carbide burrs fit makita, Milwaukee, dewalt, fordom, and most of the other rotary tools and grinders. Generally can be used with handheld electric or pneumatic tool drive.
Tungsten carbide burrs- tungsten carbide rotary burrs are widely used for cutting, grinding, acrylics, deburring, and chamfering of various materials such as：all kinds of metals, shaping, sculpting, fibreglass, wood, drills, high-speed engravers, die grinders, plastics, ceramics, micro motors, steel, flexible shafts, stone. It is compatible with pneumatic rotary tools, hobby rotary tools.
1. Tinpec
#adDrilling, Tungsten Steel Die Grinder Bits for Woodworking, Tinpec Double Cut Cutting Burrs with 1/8" Shank & 1/4" Head, Metal Carving, Carbide Burr Set, Engraving & Polishing – 10PCS
#adDie grinder cutting burrs: carbide burrs casted from tungsten steel with amazing HRA>85. 1/8” shank: with widely adopted 1/8” shank, tinpec carbide burrs are compatible with most handheld electric or air powered tools, also in machine tools.
More information #ad
Sharp double cut: with grooves evenly crossed, steel, Tinpec double cut cutting burrs are 2x sharper and faster, plastic, stone, perfect for all materials like wood, ceramic and aluminum. A smart choice for your DIY, engraving, polishing, woodworking and carving projects. Long service life: thanks to our hardened Tungsten Steel and superb tech, Tinpec die grinder bits are 10x more lasting than high-speed steel and 200x than grinding wheel. Fast and smooth centering with the three jaw chuck.
| Brand | Tinpec #ad |
| Manufacturer | Tinpec #ad |
| Part Number | 2021-GB00190 |
More information #ad
2. CBTONE
#adCBTOEN 20 PCS Carbide Burr Set 1/8 Inch Shank Double Cut Tungsten Carbide Rotary Burrs Die Grinder Bits for Carving, Engraving and Drilling, Polishing
#adMore information #ad
Assorted shapes include: ball, taper, rounded cylinder, cone, flame, flat top cylinder. Generally can be used with handheld electric or pneumatic tool drive can also be used in machine tool.| Brand | CBTONE #ad |
| Manufacturer | CBTONE #ad |
| Part Number | CBUS-CarbideBurr-1/8Inch-20PCS-190301fa |
More information #ad
3. JESTUOUS
#adCarbide Burr Set JESTUOUS 1/8 Inch Shank with 1/4 Inch Head Double Cut Rotary Burrs Die Grinder Drill Bits for Woodworking Engraving Drilling Carving,10pcs
#adMore information #ad
Material is tungsten carbide, sharp and sturdy, processing all kinds of metal and non-metal. Shank diameter:3mm1/8 inch, Cutting head diameter:6mm1/4 inch, and 10pcs/set. For cast iron, plastics, alloy steel, cast steel, carbon steel, stainless steel, metal and other materials.| Brand | JESTUOUS #ad |
| Manufacturer | Tungsten technology inc #ad |
| Part Number | bcaae87cb92e0b9587288ac57f58ce36 |
More information #ad
4. POLIWELL
#adMetal Carving Engraving Polishing, 10pcs 1/8" Shank, 1/4" Head Length Rotary Tool Cutting Burrs + 20pcs Tungsten Solid Die Grinder Bits for Woodworking, 30 PCS Double Cut Carbide Burr Set, Drilling
#adAdaptability 1/8” shank fits most die grinders and small rotary tools with three jaw chuck for accurate centering. Tungsten carbide material also makes bits more wear-resistant and heat-resistant, preventing carbide bur from getting too hot in the process of use. Packed with plastic storage case.
More information #ad
Another 10pcs 3mm head are single cut for hard material, effectively reduce the chips clogging the grooves and make chip removal easier. Which makes it more suitable for materials with relatively low density, such as wooden, steel and so on. Wide range of types and can be used for fine detail work, grooving, engraving, chamfering, trimming, grinding, reaming, rust removal, burr cleaning, polishing, beveling, hollow, including cutting, touch-up and finishing. Carbide die grinder bitstotal length:45-50mm; shaft diameter: 1/8 inch3mm; drill bit size: 6mm and 3mm. Used on wood, carbon steel, and marble, alloy steel, copper, glass, jade, aluminum, and other metals, iron, stainless steel, plastic, bone etc. Double & single cutthe groove lines of these 6mm head and 10pcs 3mm head carbide rotary burr's head are crossed, such as iron, can prevents chipping, plastic and aluminum.
| Brand | POLIWELL #ad |
| Manufacturer | Jinhua Puxian e-commerce Co.,Ltd #ad |
| Part Number | CCB30PM |
More information #ad
5. uxcell
#ad3pcs, uxcell Tungsten Carbide Rotary Files 1/8" Shank, Single Cut Top Flat Cylinder Rotary Burrs Tool 6mm Dia, for Die Grinder Alloy Steel Hard Metal Carving Polishing Model Engineering
#adSpecifications: shank diameter: 3mm1/8", cutting edge diameter: 6mm. Versatile use: widely used for metalwork, chamfering, wood carving, tool making, deburring, casting, jewelry making, welding, model engineering, grinding, sculpting.
More information #ad
Tips: requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Long working life: made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life.| Brand | uxcell #ad |
| Manufacturer | uxcell #ad |
| Height | 1.97 Inches |
| Length | 0.79 Inches |
| Width | 0.79 Inches |
| Part Number | a18121200ux0663 |
More information #ad
6. uxcell
#ad2pcs, Single Cut Cylindrical Radius End Rotary Burrs Tool 3mm Dia, for Die Grinder Drill Bit Alloy Steel Hard Metal Carving Polishing, uxcell Tungsten Carbide Rotary Files 1/8" Shank
#adAlways ensure your burrs shank is well inserted into your collet and clamped down tightly. Single cut design: single groove rotary files are more suitable for the object density is relatively high, stainless steel, such as alloy steel, hardened steel.
More information #ad
Fits most rotary die grinders. Tips: requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Specifications: shank diameter: 3mm1/8", cutting edge diameter: 3mm. Long working life: made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life.| Brand | uxcell #ad |
| Manufacturer | uxcell #ad |
| Height | 1.97 Inches |
| Length | 0.79 Inches |
| Width | 0.79 Inches |
| Part Number | a18121200ux0729 |
| Model | a18121200ux0729 |
More information #ad
7. YAKAMOZ
#adYakamoz 10Pcs 3mm 1/8" Shank Long Double Cut Tungsten Carbide Burrs Rotary Files Diamond Burs Bit Set for Die Grinder Rotary Tool, 4-Inch Length
#adHardness: processing all kinds of metalincluding all sorts of hardened steel and non-metal such as marble, plastic, jade, wood, and the machining hardness can reach to HRC70.
More information #ad
Double cut design: suitable for deburring and polishing cast iron, carbon steel, alloy steel, cast steel, stainless steel and other materials. Durable: made of heat-treated tungsten carbide which lasts long working life, sharp and durable. Shank diameter: 3mm 1/8 inch, cutting edge diameter: 6mm 1/4 inch, Total length: 100mm4 inch.| Brand | YAKAMOZ #ad |
| Manufacturer | Yakamoz #ad |
| Part Number | GY0401 |
More information #ad
8. YUFUTOL
#ad10pcs Aluma Cut Carbide Rotary Burrs for Aluminum 3mm Shank Fits Die Grinder Drill for Woodworking,Drilling, Aluminum Craving,Engraving, Polishing, YUFUTOL 1/8 inch Carbide Burr Set
#adMore information #ad
10pcs carbide rotary burr set 6mm Cut Dia, 3mm Shank, fits dremel and most small rotary tools. Made of heat-treated carbide sharp and durable, packed with anice plastic case for safety storage and protection.| Brand | YUFUTOL #ad |
| Manufacturer | LA HARDWARE INC #ad |
| Height | 0.79 Inches |
| Length | 3.94 Inches |
| Weight | 0.13 Pounds |
| Width | 2.36 Inches |
| Part Number | NFBA-ALUB-10P |
| Model | NFBA-ALUB-10P |
More information #ad
9. uxcell
#adUxcell Tungsten Carbide Rotary Files 1/8" Shank, for Die Grinder Drill Bit Alloy Steel Hard Metal Carving Polishing Engraving, 2pcs, Single Cut Ball Shape Rotary Burrs Tool 2mm Dia
#adFits most rotary die grinders. Specifications: shank diameter: 3mm1/8", cutting edge diameter: 2mm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly. Tips: requirement of the carbide burrs rotating speed is: 4000-50000 rpm.
More information #ad
Long working life: made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life. Single cut design: single groove rotary files are more suitable for the object density is relatively high, such as alloy steel, stainless steel, hardened steel.| Brand | uxcell #ad |
| Manufacturer | uxcell #ad |
| Height | 1.97 Inches |
| Length | 0.39 Inches |
| Width | 0.39 Inches |
| Part Number | a19012700ux0194 |
| Model | a19012700ux0194 |
More information #ad
10. WUWTOOLS
#ad1/8"3mm Shank and 1/8" Head Double Cut Die Grinder Bit Tungsten Steel Tool DIY Wood Stone Carving Metal Glass Grinding Engraving Polishing Shaping Drilling, Carbide Cutting Rotary Burrs Set 20PCS
#adEasy to use- the carbide burrs fit makita, Milwaukee, dewalt, fordom, and most of the other rotary tools and grinders. Generally can be used with handheld electric or pneumatic tool drive.
More information #ad
High quality material - ◆ made of tungsten carbide. The durability is 10 times higher than HSS burrs and 200 times higher than small grinding wheels. Rpm recommendations：7000-35000 High-strength and ultra-sharp cutting teeth, saving working time. Tungsten carbide burrs- tungsten carbide rotary burrs are widely used for cutting, grinding, acrylics, deburring, and chamfering of various materials such as：all kinds of metals, shaping, sculpting, fibreglass, wood, drills, high-speed engravers, die grinders, plastics, ceramics, micro motors, steel, flexible shafts, stone. It is compatible with pneumatic rotary tools, hobby rotary tools.
| Brand | WUWTOOLS #ad |
| Manufacturer | WUWTOOLS #ad |
| Part Number | 20pcs-3-3 |
| Model | 20pcs-3-3 |
More information #ad
