Top 10 12888 Clock Movement with No Shaft – Clock Movements

As an Amazon Associate I earn from qualifying purchases.

1. TIKROUND

#ad

Youngtown 12888 Snap in Type 4.5mm Hour Shaft Length Continuous Sweep Quartz Clock Movement,8mm Total Shaft Length C Hands

#ad
TIKROUND #ad - Young town manufactures the 12888 series in various models, makesure the existing shaft and threads before ordering and you will get the right replacement. Movement total shaft length is 8mm 5/16 inch, thread length is 4. 5mm 11/64 inch. Applicable to cross-stitch, craft clock, three-dimensional embroidery, frameless draw clock, etc. Instructions - Included along with the movements. Sweep silent movement:suitable for 1-2 mm 1/25 -5/66 inch thickness clock panel. Wall clock movement replacement: Snap In Type Clock Accessory with No Bushing.
BrandTIKROUND #ad
ManufacturerTIKROUND #ad
Height1.42 Inches
Length4.69 Inches
Width2.28 Inches
Part NumberTIKROUND-M-046
ModelTIKROUND-M-046

2. TIKROUND

#ad

Youngtown 12888 2 Pack Clock Movement Mechanism with 4 Pairs of Short Hands Battery Silent Sweep Operated Quartz Clock Kit DIY Repair Parts Replacement,Total Shaft Length is 13.5 mm 17/32 inch. …

#ad
TIKROUND #ad - Accurate time-keeping & quiet motor: features youngtown 12888 clock mechanism, which offers watchmaker's accuracy and dependability; equipped with sweeping motion, no ticking; powered by a AA battery.

Choose the right clock mechanism: total shaft length is 13. 5 mm 17/32 inch, thread length is 5. 5 cm 9/32 inch; suitable for 1-3 mm 3/64 - 7/64 inch thickness clock panel. If you want to replace your old movement, carefully measure the movement shaft length. Please according to picture 3 to choose the right size. Good diy clock supply: 4 pairs of hands with different shapes, perfect for clock face over 5 inch in diameter.

Suitable for repairing, replacing the broken parts of a clock or serving as good handwork material to make a clock by yourself. Package contents: 2 movements, 2 Metal hooks, 4 pairs of hands with different shapes, and some accessories. Come with the specially designed protect box and instructions.
BrandTIKROUND #ad
ManufacturerTIKROUND #ad
Part NumberTIKROUND-M-016

3. TIKROUND

#ad

Youngtown 12888 Movement for Clock Repair Replacement 16mm 41/64 inch Shaft Length 8mm 5/16 inch Thread Length.

#ad
TIKROUND #ad - Package contents: a clock movement, 3 minute hands, a second cap nut, a Metal hook and Brass nut, a rubber gasket, 3 Second hands, a brass washer, 3 Hour hands, come with the specially designed protect box and instructions.

Good for repairing, three-dimensional embroidery, craft clock, frameless draw clock, replacing or making a clock. Applicable to cross-stitch, etc. Movement total shaft length is 16mm 41/64 inch, thread length is 8mm 5/16 inch. Movement suitable for 2-6 mm 5/64 - 15/64 inch thickness clock panel. Youngtown manufactures the 12888 series in various models, Please check the dimensions of this movement prior to purchase to verify the dimensions.
BrandTIKROUND #ad
ManufacturerTIKROUND #ad
Part NumberTIKROUND-M-074
ModelTIKROUND-M-074

4. TIKROUND

#ad

12888 Quartz DIY Wall Clock Movement Mechanism Repair Parts Replacement Kit Sweep Silent Movement,13mm 1/2 Inch Maximum Dial Thickness, 23mm 29/32 Inch Total Shaft Length.Black Hand

#ad
TIKROUND #ad - Good for repairing, replacing or making a clock. Movement total shaft length: 23 mm 29/32 inch, thread length: 15 mm 19/32 inch. Applicable to cross-stitch, craft clock, three-dimensional embroidery, frameless draw clock, etc. Instructions - Included along with the movements. Young town manufactures the 12888 series in various models, Please check the dimensions of this movement prior to purchase to verify the dimensions. Clock movement suitable for 9 - 13 mm 23/64 - 1/2 inch thickness clock panel.
BrandTIKROUND #ad
ManufacturerTIKROUND #ad
Part NumberTIKROUND-M-041
Model8541847228

5. TIKROUND

#ad

Youngtown 12888 Sweep Silent Clock Movement Mechanism with 2 Sets Small Hands 13.5mm 17/32 inch Shaft Length 5.5mm 7/32 inch Thread Length.

#ad
TIKROUND #ad - Clock mechanism size: total shaft length is 13. 5 mm 37/64 inch, thread length is 5. 5 mm 9/32 inch; sweep silent movement, suitable for 1-3 mm 3/64 - 7/64 inch thickness clock panel. Package : come with specially designed box convenient to carry and protect all from scratching, bending, and other damage while shipping.

Clock, 2 pieces of hour hands, 1 second cap and mounting hardware kits, 2 pieces of minute hands, etc. Instructions - Included along with the movements. Warm notice: there are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent.

Clock hands kit: package includes 1 metal hook, easy for installation; simple and elegant design, 2 second hand, these replacement parts suit well to different styles of clock frame. Accurate time-keeping & quiet motor: features youngtown 12888 clock mechanism, which offers watchmaker's accuracy and dependability; equipped with sweeping motion, no ticking; powered by a AA battery.
BrandTIKROUND #ad
ManufacturerTIKROUND #ad
Part NumberTIKROUND-M-068
ModelTIKROUND-M-012

6. TIKROUND

#ad

Quartz DIY Wall Clock Movement Mechanisms Battery Powered DIY Repair Parts Replacement with 260 mm/ 10.2 Inch Long Spade Hands,3/10 Inch Maximum Dial Thickness,29/32 Inch Total Shaft Length.

#ad
TIKROUND #ad - 260 mm 102 inch; Second caps is approx. Diy clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames.

7 mm 028 inch. Clock movement replacement: high torque clock with hook, long shaft, drive long clock hands 10 mm to 450 mm. 187 mm 7. 4 inch; Minute hand is approx. Movement size: total shaft length is 23 mm 29/32 inch, thread length is 12 mm 15/32 inch, suitable for 4 - 8 mm 5/ 32 - 5/16 inches thickness clock panel. Warm notice: when you install them, please keep the hour hand and minute hand parallel; And please do not use too much pressure to avoid bending them. Center of hole hand size: hour hand is approx.
BrandTIKROUND #ad
ManufacturerTIKROUND #ad
Part NumberC-001
Modelc-001

7. TIKROUND

#ad

TIKROUND Original Youngtown 12888 Pendulum Type Movement Step Clock Accessory Quartz DIY Movement Kits,5/16 Inch Maximum Dial Thickness, 4/5 Inch Total Shaft Length.

#ad
TIKROUND #ad - Applicable to cross-stitch, craft clock, frameless draw clock, three-dimensional embroidery, etc. Instructions - Included along with the movements. Package includes 2 pieces of minute hands, 2 pieces of hour hands, 1 second cap and mounting hardware kits, easy for installation; Simple and elegant design, 2 second hands, these replacement parts suit well to different styles of clock frame.

Good for repairing, replacing or making a clock. Pendulum type step movement, suitable for 4-8 mm 5/32 - 5/16 inch thickness clock panel, total shaft length is 20mm(4/5 inch), thread length is 11.7 mm 9/20 inch. Max pendulum swing: 26°;max pendulum Weight: 40g ; Max Pendulum Length: 35cm. Young town manufactures the 12888 series in various models, Please check the dimensions of this movement prior to purchase to verify the dimensions.
BrandTIKROUND #ad
ManufacturerTIKROUND #ad
Weight0.09 Pounds
Part NumberTIKROUND-M-047

8. TIKROUND

#ad

TIKROUND Youngtown 12888 High Torque Long Shaft Clock Movement Mechanism with 4 Sets Hands Total Shaft Length 1-3/32 inch.

#ad
TIKROUND #ad - Diy clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames.

Package contents: 1 clock movement with 1 hook, 2 Minute hands and some mounting hardware, 2 Hour hands, coming with specially designed box and instructions. Long spindle quartz clock replacement movement parts with metal hook, Good for repairing, replacing or making a clock. Warm notice: when you install them, please keep the hour hand and minute hand parallel; And please do not use too much pressure to avoid bending them. Movement size: total shaft length is 28 mm 1-3/32 inches, thread length is 15. 4mm 39/64 inch, suitable for 9 - 13 mm 23/64 - 33/64 inch thickness clock panel.
BrandTIKROUND #ad
ManufacturerTIKROUND #ad
Part NumberTIKROUND-M-114

9. COLIBROX

#ad

12888 quartz clock movement, Factory model 12888S

#ad
COLIBROX #ad - Hour:. 2" 5 mm minute:. 125" 3. 2 mm. Movement housing is 2-3/16" x 2-3/16" x 5/8. Threaded portion is 5/16" diameter and 1/4" 7mm long. Diameters of hand shaft mounts are the most popular. Total shaft length is 9/16" 14. 75mm ► uses one "AA" battery not included. Youngtown puts the number 12888 on nearly everything they make so be sure to check the following dimensions:.
BrandCOLIBROX #ad
ManufacturerNA #ad

10. Hicarer

#ad

High Torque Quartz Clock Movement Replacement Parts with 208 mm/ 8.2 Inches Long Spade Hands and Hanger 20 mm 4/5 inches

#ad
Hicarer #ad - Parameter of the kit: i shaft, high torque clock mechanism, drive long clock hands from 10 mm to 450 mm. Movement size: suit for 4 - 8 mm 4/ 25 - 3/ 10 inches thickness clock panel, the total shaft length is 20 mm 4/ 5 inches, thread length is 11.

7 mm 9/ 20 inches. Material and note: the clock pointer is made of aluminum, please do not use too much pressure to avoid bending, please check the size before purchase, suitable for AA battery. Package contents: a clock movement with hook, 2 hands and some mounting hardware, come with the specially designed protect cardboard box and instructions. Size from center of the hole to tip: the hour hand is 154 mm/ 6. 1 inch; minute hand is 208 mm/ 8. 2 inch; second caps is 7 mm/ 028 inch.
BrandHicarer #ad
ManufacturerHicarer #ad
Height0.79 Inches
Length11.81 Inches
Width5.12 Inches
Part NumberHicarer-High Torque Quartz-01