As an Amazon Associate I earn from qualifying purchases.
Durable- stalwart’s chisels and punch tools are made from heat treated chrome vanadium steel construction with 54~58 HRC hardness. The carry case also makes for easy transport and storage of the tools. Note: this is an exclusive product of Stalwart and ONLY Chisel and Punch Sets by Stalwart are to be genuine.
5 pin punches; 3/32”x 4 ¼”, 3/16”x 6” and 1 chisel gauge. The chisel set can be used multiple times without worry of dulling or wear from use. Easy to store and carry- the cloth roll up carry and storage pouch will keep your chisel and punch set safe, secure, and organized until your next use. 2 center punches; 1/8”x5”, 1/8”x 5 ¾”, 1/4”x 6 ¾”. Set includes- the 16-piece set consists of 5 taper punches; 3/32”x5 1/4”, ¼”x 5 ¾”.




Specifically designed for jewelers, trigger guard/ charging handle roll pin, charging handle pins or any other machinery linkage pins, gas block roll pin, repairs and crafts.
The high quality chrome-vanadium steel with around hardness of 50 HRC can eliminate bending, rust-preventative coating have strong resistance to corrosion, flexing or broken when punched on; and the upgraded version tapered punch applied with classic natural finish with a dry-touch, abrasion or glaring damage. Small, watchmakers, lightweight hand tools used to install / drive hollow pins, tension pins or split roll pins, e. G.

Note: this is an exclusive product of stalwart and ONLY Chisel and Punch Sets by Stalwart are GUARANTEED to be genuine. Easy to store and carry- the cloth roll up carry and storage pouch will keep your chisel and punch set safe, secure, and organized until your next use.
Durable- stalwart’s chisels and punch tools are made from heat treated chrome vanadium steel construction with 54~58 HRC hardness. The carry case also makes for easy transport and storage of the tools. 2 center punches;1/8”x5”, 1/8”x 4 ¾”, 1/2”x 6”, 5/8”x 6 ½”. Set includes- the 16-piece set consists of 5 taper punches; 3/32”x5 1/4”, 3/16”x 5 ¼”, 1/8”x 5 ¾”, 1/4”x 6 ¾”. The chisel set can be used multiple times without worry of dulling or wear from use.



1. Stalwart
#ad
Pin Punches, 16 Pieces- Includes Taper Punches, Center Punches, and Storage Case- By Stalwart, Chisel Gauge, Stalwart A-PT1046d Chisel Set, Cold Chisels
#adStalwart #ad - Multiuse tool set- the 16 piece punch and chisel is a must have for artists, cars, metal, dressers, moldings, woodworkers, sculpture, and home DIYers.3 cold chisels: 3/8”x 5 ½”, 3/16”x 6 ¼”, 5/32”x 5”, 3/16”x 5 ¼”, 1/2”x 6”, 1/8”x 4 ¾”, 5/32”x6”, 5/8”x 6 ½”. Hardness 54~58 HRC.Durable- stalwart’s chisels and punch tools are made from heat treated chrome vanadium steel construction with 54~58 HRC hardness. The carry case also makes for easy transport and storage of the tools. Note: this is an exclusive product of Stalwart and ONLY Chisel and Punch Sets by Stalwart are to be genuine.
More information #ad
Ideal for working with wood, metal workers, automotive work, carpenters, carving detail into cabinets, wood furniture and more!. Satisfaction – stalwart is committed to providing consumers with the absolute best price and value on our entire line of products. 5 pin punches; 3/32”x 4 ¼”, 3/16”x 6” and 1 chisel gauge. The chisel set can be used multiple times without worry of dulling or wear from use. Easy to store and carry- the cloth roll up carry and storage pouch will keep your chisel and punch set safe, secure, and organized until your next use. 2 center punches; 1/8”x5”, 1/8”x 5 ¾”, 1/4”x 6 ¾”. Set includes- the 16-piece set consists of 5 taper punches; 3/32”x5 1/4”, ¼”x 5 ¾”.
Brand | Stalwart #ad |
Manufacturer | TRAUV #ad |
Height | 0.13 Inches |
Length | 11.25 Inches |
Width | 9.5 Inches |
Part Number | A-PT1046 |
Model | A-PT1046 |
More information #ad
2. Wheeler
#ad
Wheeler Engineering Hammer and Punch Set with Brass, Steel, Brass/Polymer Hammer and Storage Case for Gunsmithing Maintenance, Plastic Punches
#adWheeler #ad - Non-destructive: chrome plated steel hammer has nylon and brass heads to ensure strong, but non-marring contact while in use. Storage: comes with a convenient plastic molded storage case. Be prepared: features brass, steel and nylon solid punches making it the ideal kit for your workbench.More information #ad
Dimensions: 9. 75" l x 5. 25" w x 2" D. Includes: 1/8", 3/16", 2 3/32" steel punches, 7/32", 9/32" and 5/16" brass punches, 1/4", 9/64", 15/64", 5/32", 2 1/16", 3/8" plastic punches.Brand | Wheeler #ad |
Manufacturer | Sportsman Supply Inc. #ad |
Height | 9.09 Inches |
Length | 34.09 Inches |
Weight | 0.88 Pounds |
Width | 11.06 Inches |
Part Number | 951900 |
Model | 951900 |
More information #ad
3. SE
#ad
SE 20-Piece Wire Gauge 61-80 HSS Twist Drills Set with Plastic Case, 826HDP
#adSE #ad - Professional quality. Used with a hand drill, power drill, or pin vise. Great for making holes in soft metals, plastics, wood, and more. Drill sizes: #61-80 wire gauge. Comes in an indexed plastic slide holder for easy storage and transportation.More information #ad
Brand | SE #ad |
Manufacturer | Sona Enterprises #ad |
Height | 19.9 Inches |
Length | 14.5 Inches |
Weight | 0.1 Pounds |
Width | 12.9 Inches |
Part Number | 826HDP |
Model | 826HDP |
More information #ad
4. Mayhew
#ad
Mayhew Select 89082 Punch Set, Black, 3-Piece
#adMayhew #ad - Includes: 24008 7/16-inch center Punch 1/4-Inch Pt. 2-year Limited. 43502 7/32-inch by 5-inch Prick Punch. 74001 5/16-inch reg ec Center Punch.More information #ad
Brand | Mayhew #ad |
Manufacturer | Mayhew #ad |
Height | 2 Inches |
Length | 12 Inches |
Weight | 0 Pounds |
Width | 4 Inches |
Part Number | 89082 |
Model | 39082HT |
More information #ad
5. MULWARK
#ad
Jewelry, MulWark 9pc Best Bolt Catch Roll Pin Punch Set |Assembly Kit-Corrosion Resistant Assorted Hand Pin Remover Tool with Holder for Automotive, Craft, Watch Repair
#adMULWARK #ad - Use drop forged and heat treated steel to offer extreme durability, and the long, parallel ground shanks with knurled handle can achieve better grip. Lifetime warranty: all mulwark tools are warranted to be free of defects in materials and workmanship for as long as you own the product, you may return this product free of charge with original purchase receipt or choose to get a replacement.Specifically designed for jewelers, trigger guard/ charging handle roll pin, charging handle pins or any other machinery linkage pins, gas block roll pin, repairs and crafts.
More information #ad
Bolt carrier group pin, foosball men roll pin, etc. The fashionable orange punches pouch makes it more standing out in your tool room and decrease the tediousness of repair/building work; the nylon storage case also offers a great organizing solution for the punches. The high quality chrome-vanadium steel with around hardness of 50 HRC can eliminate bending, rust-preventative coating have strong resistance to corrosion, flexing or broken when punched on; and the upgraded version tapered punch applied with classic natural finish with a dry-touch, abrasion or glaring damage. Small, watchmakers, lightweight hand tools used to install / drive hollow pins, tension pins or split roll pins, e. G.
Brand | MULWARK #ad |
Manufacturer | MulWark #ad |
Height | 1.7 Inches |
Length | 8.8 Inches |
Weight | 0.8 Pounds |
Width | 1.6 Inches |
Part Number | MLK-53742 |
More information #ad
6. Stalwart
#ad
And Storage Case- By Stalwart, Cold Chisels, Chisel Gauge, Punch And Chisel Set, 16 Pieces- Includes Taper Punches, Center Punches, Pin Punches
#adStalwart #ad - Satisfaction guaranteed – stalwart is committed to providing consumers with the absolute best price and value on our entire line of products. Hardness 54~58 HRC. 5 pin punches; 3/32”x 4 ¼”, 3/16”x 6” and 1 chisel gauge. 3 cold chisels:3/8”x 5 ½”, 5/32”x 5”, 3/16”x 6 ¼”, 5/32”x6”, ¼”x 5 ¾”.Note: this is an exclusive product of stalwart and ONLY Chisel and Punch Sets by Stalwart are GUARANTEED to be genuine. Easy to store and carry- the cloth roll up carry and storage pouch will keep your chisel and punch set safe, secure, and organized until your next use.
More information #ad
Ideal for working with wood, automotive work, carving detail into cabinets, metal workers, carpenters, dressers, cars, woodworkers, metal, wood furniture and more!. Multiuse tool set- the 16 piece punch and chisel is a must have for artists, moldings, sculpture, and home DIYers. Durable- stalwart’s chisels and punch tools are made from heat treated chrome vanadium steel construction with 54~58 HRC hardness. The carry case also makes for easy transport and storage of the tools. 2 center punches;1/8”x5”, 1/8”x 4 ¾”, 1/2”x 6”, 5/8”x 6 ½”. Set includes- the 16-piece set consists of 5 taper punches; 3/32”x5 1/4”, 3/16”x 5 ¼”, 1/8”x 5 ¾”, 1/4”x 6 ¾”. The chisel set can be used multiple times without worry of dulling or wear from use.
Brand | Stalwart #ad |
Manufacturer | TRAUV #ad |
Height | 0.13 Inches |
Length | 11.25 Inches |
Weight | 2.5 Pounds |
Width | 9.5 Inches |
Part Number | 75-HT4072 |
Model | 75-HT4072 |
More information #ad
7. GEARWRENCH
#ad
GEARWRENCH 7 Pc. Hook & Pick Set, 84000D
#adGEARWRENCH #ad - Oil and solvent resistant handle provides a longer tool life. Variety of shapes to leverage or pull parts, springs, and cotter pins. Meets or exceeds ASME standards for performance and quality.More information #ad
Ergonomic tri-lobe dual material handle provides the optimal balance of strength and efficiency. Full polish alloy steel blade prevents rust and corrosion. Access around wiring, hoses, and other engine bay obstacles. Blades laser etched with part number for quick identification.Brand | GEARWRENCH #ad |
Manufacturer | Cooper Tools #ad |
Height | 1.63 Inches |
Length | 16.06 Inches |
Weight | 1.56 Pounds |
Width | 11.06 Inches |
Part Number | 84000D |
Model | 84000D |
Warranty | Standard Limited Lifetime |
More information #ad
8. All Industrial Tool Supply
#ad
Precision 2-4-6 Blocks
#adAll Industrial Tool Supply #ad - Our part # all-55540 Heat treated and case hardened to HRC 57-62. Accuracy and squareness on all sides within. 0006" cross drilling design allows for efficient use of lower weight with maximum strength.More information #ad
Made of precision-grade tool steel hardened and ground on all 6 sides of block. Dimensions: 2" x 4" x 6"; weight: 18. 3 lbs.Brand | All Industrial Tool Supply #ad |
Manufacturer | TFT Tools #ad |
Weight | 18.3 Pounds |
Part Number | BL-246 |
More information #ad
9. Stupid Simple Tools
#ad
SST Mill & Lathe Adjustable Tramming, Squaring System
#adStupid Simple Tools #ad - Stainless steel Center pin is 4 in. Backed by sST Lifetime Warranty. Tall. Measurement diameter is Fully Adjustable from 3 - 6 in. Includes two 1 in. Cnc machined from 6061 Aluminum with a Protective Anodized Finish. Dial indicators with. 0005” gradation Colors may vary from picture.More information #ad
Brand | Stupid Simple Tools #ad |
Manufacturer | SST Co. #ad |
More information #ad